Quote Originally Posted by radargeek View Post
If you're getting F1 sensor errors unplug that sensor and see if you still get the "stuck on green" situation. If you do, unplug another sensor, repeat until you've found the culprit.

Then check the wiring to make sure it isn't pinched somewhere or rubbed through. If the wiring is ok and the problem continues, it's a faulty sensor most likely.
How can I tell if I'm getting which sensor error? I don't have a speaker. I'm finally getting it to work with 2 sensors. On F1 & F2. It's staying solid green for nearly 2 mins then it goes into solid blue. Even though skip warm up is on.

When turn off and plug in the 3rd sensor (not even trying the 4th because I'm sure it's broken it's getting burning hot) and turn it back it stays solid green.


Sent from my iPhone using Tapatalk