i cant remember what cpu i have as my cpu has been replaced once before
but i just stuck with the green wire as i have relays already installed ,,MY green wire triggers instantly on alert if i let the alert cycle out the green wire looses voltage within 3 to 4 seconds after my allert
im not to sure why your green wire doesnt work
i noticed in the vid ,,the ALP said INTERFERENCE DETECTION ONLY could this have affects on the green wire
Last edited by deano; 07-06-2015 at 07:10 PM.
+1Originally Posted by deano
using same relay as Deano, using the green wire on my V1 CPU. Mine switches off shortly after the audio warning cycles out. Also mine also still switches when in defense mode, but under the defined ULID speed (i.e when the car is parked and the GPS integration switches from defense to detection only)
2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |
Tman (08-17-2015)
Posting Permissions
Reply With Quote
Connect With Us