Anyone using "Privacy Protection" mode?

[winterbrew]

No sound but LED changes color once you hit the threshold. If I remember correctly it's yellow under your preset and then back to Blue above it.

Yes, that's the LED and ALPConnect colours I have with v1 CPU and v1 R/G module with GPS

[modsl55amg]

If it does not say HW 2.0 on the bottom yes you would need an RG Module to add the GPS Antenna.

Tom, The sticker on my ALP Control Unit box indicates: AL Priority - CONTROL UNIT Hw.2 and also YOP: 2014 - 12
Therefore, I would only need to purchase the GPS Antenna from you, and have my installer connect it directly to the CONTROL UNIT, then I can modify my system's Control Box Setup Selections to include the GPS related items. Is this correct ?

[BestRadarDetectors]

Tom, The sticker on my ALP Control Unit box indicates: AL Priority - CONTROL UNIT Hw.2 and also YOP: 2014 - 12
Therefore, I would only need to purchase the GPS Antenna from you, and have my installer connect it directly to the CONTROL UNIT, then I can modify my system's Control Box Setup Selections to include the GPS related items. Is this correct ?

Correct.

[Barry626]

I just ordered the GPS Antenna.

In settings there is two areas to set speed (Define PDC) & (Define LID). I set it for 24 in both would this be correct? or do I only set speed for LID? THANKS!

[BestRadarDetectors]

I just ordered the GPS Antenna.

In settings there is two areas to set speed (Define PDC) & (Define LID). I set it for 24 in both would this be correct? or do I only set speed for LID? THANKS!

You also would need to adjust:

1. GPS receiver present (Change to Yes)
2. Define PDC SPEED limit (This will prevent parking sensors from alerting if you are in traffic and get close to a car in front of you)
3. Define LID SPEED limit (Speed in which you need to be traveling above for the Jammer to operate)
4. If Radar Antenna is used... Define RADAR SPEED limit (Speed in which you do not want to get radar alerts under)

[wirelessandy]

If there's no GPS signal (say, in an underground garage), how does the system behave vs. the set speed thresholds?

[BestRadarDetectors]

If there's no GPS signal (say, in an underground garage), how does the system behave vs. the set speed thresholds?

If No Signal it will Defend as if there was no GPS Antenna connected and you will see a Blue LED.

[Barry626]

You also would need to adjust:

1. GPS receiver present (Change to Yes)
2. Define PDC SPEED limit (This will prevent parking sensors from alerting if you are in traffic and get close to a car in front of you)
3. Define LID SPEED limit (Speed in which you need to be traveling above for the Jammer to operate)
4. If Radar Antenna is used... Define RADAR SPEED limit (Speed in which you do not want to get radar alerts under)

Thanks much!

[winterbrew]

If there's no GPS signal (say, in an underground garage), how does the system behave vs. the set speed thresholds?

If you're using hifi, it will also state "GPS signal lost"

[Barry626]

You also would need to adjust:

1. GPS receiver present (Change to Yes)
2. Define PDC SPEED limit (This will prevent parking sensors from alerting if you are in traffic and get close to a car in front of you)
3. Define LID SPEED limit (Speed in which you need to be traveling above for the Jammer to operate)
4. If Radar Antenna is used... Define RADAR SPEED limit (Speed in which you do not want to get radar alerts under)

I just received my GPS antenna today.
I see it has a sticky cup does this have to mount to windshield or ok on dashboard?
Also do I connect this first to control box and then download new settings? or do settings first & then connect the GPS antenna?