Quote Originally Posted by BestRadarDetectors View Post
You can customize it to only illuminate when there are alerts and I find it very useful having it in my direct view so you know where the source is immediately.
Tom/BRD,

After experimenting with the brightness selections for the Control Set LED, and the External LED, I have both LEDs set at "2". When I previously set the External LED to "1" the LED went off after the startup sequence.

My Question: When the External LED is set to "1", and the External LED goes off after the startup sequence, will the External LED illuminate Red/Yellow if the system detects laser "interference" from an external source? (I have a Control Box with HW2.0, and have selected Dark Mode "Dim" and Status LED "Constant")

Thanks