AL Priority - What Have I Been Hit By?

[BestRadarDetectors]

As you can see we tested the snot out of the DALA.

Your AL Priority is still a virgin... Here are my stats:

Device information
Serial number XXXXXXX
Firmware version 4.2.2
Region North America
Power Cycles 96
Control Set FW version 2.4
Control Set HW version 1
Settings
Audio Volume 3
Parking detection range 3
Silent Power-up Disabled
Dark Mode Disabled
Parking enabled sensors Front1, Front2, Front3, Rear1, Rear2
GPS Antenna Enabled
PDC Speed Limit n/a
Working mode Parking and Laser Interference Defense
Pro mode Disabled
LID Speed Limit n/a
Radar Antenna Model STIR+
Radar Settings X, K, Ka
LID Time Unlimited – Test purposes
Specific LID settings
Vitronic Poliscan
Speed scanner Enabled
Unicam Camera
Section speed control All sensors ON
NJL SCS
Speed-laser Enabled
Riegl
Speed-laser Enabled
Trafic Observer
Speed scanner Enabled
Stalker
Speed-laser Maximum Power
Alerts by Source Speed-laser
Marksman and UltraLyte 50
Atlanta SpeedLaser Stealth 2
Kustom ProLaser 1 2
Kustom ProLaser & ProLite 39
Redspeed SpeedGuard 0
Riegl 0
Stalker 156
LTI Truspeed 76
Unipar - SL700 0
NJL SCS 101 & 102 0
Jenoptik – Laveg 0
Leivtec XV 2 0
Laser Ally 240
Error Sensitive Lasers
Jenoptik LaserPatrol 0
Jenoptik TraffiPatrol XR 0
ProLaser 2 & Atlanta SpeedLaser 8
Speed Section Control
Camea - IR Camera 0
Speed Scanner
Traffic Observer 0
Vitronic Poliscan 9
Radar
K-band 0
Ka-band 0
X-band 0
POP 0

[Mirage]

Your AL Priority is still a virgin...

You might want to remove that serial number oh experienced one... LOL. You have to remember mine was in 1 day! So yes still very much a virgin!

[BestRadarDetectors]

You might want to remove that serial number oh experienced one... LOL. You have to remember mine was in 1 day! So yes still very much a virgin!

LOL... I am sure yours will see some more action but my unit has a big head start. I do notice I also have 9 Poliscan's listed so one of the guns is coded to the wrong name and we will have to get that fixed.

[Mirage]

LOL... I am sure yours will see some more action but my unit has a big head start.

I have a feeling you'll keep the lead on this one, but I must say you sure were testing that Stalker.

I can't wait to test some more.

[Mirage]

I do notice I also have 9 Poliscan's listed so one of the guns is coded to the wrong name and we will have to get that fixed.

It's the LTI LR-100. I just shot it again and the Poliscan value increased to 13.

[BestRadarDetectors]

It's the LTI LR-100. I just shot it again and the Poliscan value increased to 13.

Have no doubt we will get this fixed Monday.

[Qui-Gon]

Not sure if this has been answered or not, but after pulling the stats from the CPU, do the statistics reset? Just curious...

[radargeek]

Not sure if this has been answered or not, but after pulling the stats from the CPU, do the statistics reset? Just curious...

AFAIK they don't reset, and there presently is no way to reset them. Hopefully a future update will add this. It would be nice to be able to clear the statistics, especially after a testing session.

So, when you pull stats, save them on your computer so you can compare them to see what "new" guns you were hit with.

Chronological logging would be nice to have. Presently only the iPhone app with the bluetooth adapter can do this.

[modsl55amg]

Your AL Priority is still a virgin... Here are my stats:

Device information
Serial number XXXXXXX
Firmware version 4.2.2
Region North America
Power Cycles 96
Control Set FW version 2.4
Control Set HW version 1
Settings
Audio Volume 3
Parking detection range 3
Silent Power-up Disabled
Dark Mode Disabled
Parking enabled sensors Front1, Front2, Front3, Rear1, Rear2
GPS Antenna Enabled
PDC Speed Limit n/a
Working mode Parking and Laser Interference Defense
Pro mode Disabled
LID Speed Limit n/a
Radar Antenna Model STIR+
Radar Settings X, K, Ka
LID Time Unlimited – Test purposes
Specific LID settings
Vitronic Poliscan
Speed scanner Enabled
Unicam Camera
Section speed control All sensors ON
NJL SCS
Speed-laser Enabled
Riegl
Speed-laser Enabled
Trafic Observer
Speed scanner Enabled
Stalker
Speed-laser Maximum Power
Alerts by Source Speed-laser
Marksman and UltraLyte 50
Atlanta SpeedLaser Stealth 2
Kustom ProLaser 1 2
Kustom ProLaser & ProLite 39
Redspeed SpeedGuard 0
Riegl 0
Stalker 156
LTI Truspeed 76
Unipar - SL700 0
NJL SCS 101 & 102 0
Jenoptik – Laveg 0
Leivtec XV 2 0
Laser Ally 240
Error Sensitive Lasers
Jenoptik LaserPatrol 0
Jenoptik TraffiPatrol XR 0
ProLaser 2 & Atlanta SpeedLaser 8
Speed Section Control
Camea - IR Camera 0
Speed Scanner
Traffic Observer 0
Vitronic Poliscan 9
Radar
K-band 0
Ka-band 0
X-band 0
POP 0

Tom (BRD),

Regarding the "Print Settings & Use Statistics" feature of the ALP system:

1. Is the firmware upgrade for this feature supposed to be installed into the ALP system when the other files are installed via a Flash Drive, e.g. (Uxxxxxxx.bin, UCSTHIFI.BIN, VOICEPAKCK.ALP, setup.alp), in order for the system to collect/store data for later retrieval?

2. Or is the "Print Settings & Use Statistics" firmware supposed to be loaded onto a Flash Drive, then inserted into the flash drive port EACH time the owner wants to retrieve information from the system that the "Settings & Use Statistics" feature provides, and writes onto the flash drive while it is inserted?

Thank you in advance for your advice.