Close
Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Nov 2015
    Posts
    20
    Thanks Given
    1
    Thanked 3 Times in 2 Posts

    Help with parasitic draw - delays car's sleep.

    I am going to pick up my BMW 2014 335i from the dealer who put a new battery in and they informed me that I had a parasitic draw from my after market accessaries. They unplugged them from the fuse box and the problem was gone. I have a ALP with three heads. bluetooth, hifi and a stir plus as a separate unit with escort live module. The units are about 1.5 years old now. The BMW dealer tech said that they were delaying the car from going to sleep. Normal sleep time is 20 minutes but with these units in it was 45 minutes. They also saw when the car was shutoff a huge spike after 15 secs and then a slow downward draw for 45 minutes. I am going to take it back to the electronics installer but wanted to see if anybody had any suggestions. When I brought the car in all 3rd party units were functional.
    Thanks,
    Chris

  2. #2
    Senior Member Tman's Avatar
    Join Date
    Nov 2013
    Posts
    1,143
    Thanks Given
    1,485
    Thanked 783 Times in 373 Posts
    I cannot give a diagnostic , though what i would do to definitively stop any draw :
    i would use a main switch to deliver the ground to all the after market accs = no close circuit = no draw.

    Good luck.

    The way to see any ghost sucker is to disconnect the positive , hook a meter in amps mode preferably in milliamps , reconnect the positive , check the reading over 1/2 hour.
    I suspect more the car than the accessories , you can repeat the process shutting off your after market accessories.

  3. The Following User Says Thank You to Tman For This Useful Post:

    oddpedestrian (03-04-2017)

  4. #3
    Senior Member radargeek's Avatar
    Join Date
    Jan 2014
    Location
    York, SC
    Posts
    525
    Thanks Given
    116
    Thanked 571 Times in 270 Posts
    You need to find a circuit that cuts off completely when you shut the ignition off, and connect your CMs to that.

    The circuit it's on now apparently has draw sensing on it which keeps it powered on for longer when there's a load on the circuit.
    If I passed you on the right, YOU are in the wrong lane!

    2016 Encounters/Saves (to date): 33.8: 1/1 (last 4/13) | 34.7: 1/1 (last 3/11) | 35.5: 19/11 (last 8/28) | K: 1/1 (last 6/26)
    2015 Encounters/Saves: 33.8: 1/0 | 34.7: 13/4 | 35.5: 19/10 | K: 4/1 | LIDAR (sighted/hit with/save): 4/1/1

    ACTIVE CMs: Redline X, K, Ka 2,4,5,8 (highway/long trip RD) | New! V1C 3.8945 K, Ka CS, TMF2 w/YaV1 (in-town RD) | ALP Quad | BlackVue DR650GW-2CH

  5. The Following 2 Users Say Thank You to radargeek For This Useful Post:

    oddpedestrian (03-04-2017), Tman (03-03-2017)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •