Close
Results 1 to 9 of 9

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member RedRocket's Avatar
    Join Date
    Nov 2013
    Location
    North America
    Posts
    2,057
    Thanks Given
    1,081
    Thanked 1,543 Times in 846 Posts
    Quote Originally Posted by RedLiner View Post
    Ok, thank you. I will see what other ways I can work with this grill. You are correct, I think I will have to trim the grill to fit the Priority Sensors.
    The reason you can't have a combination of plastic & air space in front of the NET RADAR is b/c they are 2 different mediums. When the radar wave hits plastic & open space of air it causes distortion in the radar signal & loss to the wavefront entering the aperture of the antenna Horn. End result means lower sensitivity to the Detector. All air or All plastic is best...but never both in any combination !

  2. The Following 3 Users Say Thank You to RedRocket For This Useful Post:

    curmudgeon (08-31-2016), dinkydi (11-06-2016), modsl55amg (08-31-2016)

  3. #2
    Junior Member
    Join Date
    Aug 2016
    Posts
    21
    Thanks Given
    1
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by RedRocket View Post
    The reason you can't have a combination of plastic & air space in front of the NET RADAR is b/c they are 2 different mediums. When the radar wave hits plastic & open space of air it causes distortion in the radar signal & loss to the wavefront entering the aperture of the antenna Horn. End result means lower sensitivity to the Detector. All air or All plastic is best...but never both in any combination !

    Thank you. Any thoughts on where I might install the radar?

  4. #3
    Senior Member RedRocket's Avatar
    Join Date
    Nov 2013
    Location
    North America
    Posts
    2,057
    Thanks Given
    1,081
    Thanked 1,543 Times in 846 Posts
    Quote Originally Posted by RedLiner View Post
    Thank you. Any thoughts on where I might install the radar?
    Most of my above PSL driving is on the Interstate highways, so I bias my RDs to the Driver side of the vehicle Front. Even if I'm in the Right lane behind cars or Trucks I can move left & let the RD peek around whatever is in front of me to sniff the air ahead. Putting the RD in the center of your grill tends to get shadowed or block the radar signal by whatever vehicle is ahead you. Radar cannot pass thru all that metal surface of other vehicle ahead.
    If the RD was a windshield mount, I put it high on the glass near the headliner (to shade it from the heat of the Sun) shining on it. Radar signal can easily pass thru the window glass of the cars ahead, but will still be blocked if it's a Big Rig w/ a 12' high metal trailer in front of you.

    Driver side bias for me b/c I'm usually in the Left Lane haulin' ass !
    Last edited by RedRocket; 08-30-2016 at 10:25 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •