ALP errors, what's wrong with my device?

[RedRocket]

I'm using "Kootion key USB 2.0 32gb"

BTW once i unplugged the driver side alp, alp starts up normally.

While I've really wanted to help you resolved your problems, I just can't work w/ you any longer. I've asked you a number of times specific questions, all I ever get from you are partial answers or complete avoidance to specific inquiry & you've worn out my limited patience. If you take some time to look/read the "Sticky Threads" in the AntiLaser Section on the "how to do's" of getting the system up & programmed correctly,it may help. I seem to remember that you cannot have "Profile" (which I see in your Stats listing) unless you have the HiFi option, last I remember this feature is not permitted w/ the Basic Control Set pad(& why I asked what you had)...I'll admit this may have been changed over time by AL & I just missed its add-on(to Basic Control Set) now.

It could be you have a duality of problems like bad Sensors + faulty f/w in either/both the Control Set & the Control Box. I do know that it was recommended by BRD/AL that users should not use 32Gb Thumb Drives. (I use SanDisk 'Cruzer' 8 or 16Gb USB 2.0 Flash Drives & have never had a problem). Perhaps just using the 1 good Sensor you're sure is good in the F1 slot while trying a different USB Drive of appropriate capacity & a fresh download from the ALupdate website might help.

I'm off the Forum for a while to TCB & wish you good luck w/ efforts to fix your install problems.