Menu button short press function

[RadarNinja]

I wanted to see how long they hit so I'll enable DLI & Warm-up. Thanks.

[RadarNinja]

BRD,
I am not getting consistent results on these settings. The sounds the ALP makes / doesn't make are different depending on the LID time.

Setup for all tests:
Latest CPU and control unit firmware.
North American region.
HiFi German.
Dim mode.
Constant LED.
Pro mode: Enabled.
Menu button short press function setting: None.
After LID timeout setting: DLI & Warm-up.
VoicePack mode: Detailed.
ALP testing FOB set to Marksman / Ultralyte.

Expected behavior upon hit for non-unlimited LID:
Siren and light, then voice and light, then voice when LID turns off, then constant pro mode buzzing until hit stops. Tapping a button at any point mutes all sound.

Actual behavior:
LID time of 4 seconds, I get siren and light, then voice and light, then voice when LID turns off, then constant siren and light until hit stops. Tapping a button on the control unit during constant siren does not mute the siren.
LID time of either 8 or 9 seconds, I get siren and light, then voice and light, then pro mode buzzing sound and light, then at 8 or 9 seconds voice when LID turns off. After that, only light continues to show presence of lidar.
LID time of either 8 or 9 seconds, I get siren and light, then voice and light, then pro mode buzzing sound and light. If control unit button is tapped during buzzing, all sound stops. After that, only light continues to show presence of lidar.

Is there any way to get the expected behavior at all LID times?