HiFi Control Set Pad Doesn't Like The Heat

[ApexOnYou]

How were you trying to turn it on and off in the video? With a kill switch, or by pressing POWER?
If you try pressing POWER and all you get is the LEDs flashing red as the system turns itself back off, you are likely seeing the same issue I am.

I don't have a kill switch installed, this was powering on and off from the control set. What you are describing sounds like what mine did when I had all of the sensors disconnected.

Do you have a USB Stick left in the USB Port? Is the car running with +12v or more?

X2... check the car's voltage, also check to make sure the power and ground connections to the ALP are solid.

It's likely that the HiFi control set draws more current than the regular one, so a bad ground is more likely to cause an issue with HiFi than without.

No USB stick in the USB port and 13.8v at idle. The behavior that I saw was not indicative of a loose connection. I'm really picky about how connections are made, they'd probably survive Armageddon.

Got tagged with laser today and the ALP had a gun ID glitch so I will be updating tonight for sure.