New AL Priority 2 Sensor, Wont Update Firmware?

[spitcool]

thanks. my question towards serial and firmware was more to this:

i can download firmware now, it's about 500KB. when my serial is "activated", does that filesize increase? or is it changed to work properly? i would assume that if my serial isn't activated then i couldnt even get to the page to update firmware, but i have no idea thanks again for the help here, i'm about to drive from SF to austin, tx and really would love to have my "parking sensors" in good working order

[BestRadarDetectors]

thanks. my question towards serial and firmware was more to this:

i can download firmware now, it's about 500KB. when my serial is "activated", does that filesize increase? or is it changed to work properly? i would assume that if my serial isn't activated then i couldnt even get to the page to update firmware, but i have no idea thanks again for the help here, i'm about to drive from SF to austin, tx and really would love to have my "parking sensors" in good working order

We are closed on the weekends and the factory in Croatia is also closed so not much we can really do until Monday. Try a brand name USB 2.0 USB Stick like a Sandisk or similar USB 2.0 drive. The voice pack is not even loading which leads me to believe the drive is your issue. Try a different drive (Brand Name) and download new files. Also make sure the file names are not renamed from your computer. You can also try to verify the extension cable is not the problem by connecting the drive directly to the CPU's USB Port.

Make sure your file names on your drive are the following:

U1234567.Bin
Setup.alp
UCSTHIFI.BIN
VOICEPCK.ALP

Tom

[Mirage]

We are closed on the weekends and the factory in Croatia is also closed so not much we can really do until Monday. Try a brand name USB 2.0 USB Stick like a Sandisk or similar USB 2.0 drive. The voice pack is not even loading which leads me to believe the drive is your issue. Try a different drive (Brand Name) and download new files. Also make sure the file names are not renamed from your computer. You can also try to verify the extension cable is not the problem by connecting the drive directly to the CPU's USB Port.

Make sure your file names on your drive are the following:

U1234567.Bin
Setup.alp
UCSTHIFI.BIN
VOICEPCK.ALP

Tom

Hey @spitcool, BRD has a point here. The Voice pack should load regardless as there no encryption on it. Get a very generic USB stick like a Sandisk (I believe you said you have a Kingston which should still work, but if you can try a Sandisk just in case). Also, as BRD mentioned try to remove any extensions or anything between the CPU and the USB stick. If it works the voice will start coming through. Make sure your files are named like above on the root of the USB stick.