AL Priority & Radar Integration w/Beltronics Sti-R Plus

[GotWake]

I'm waiting to see how well this works out with the controller(muting, lockouts, etc). I'll be placing an order really soon.

[BestRadarDetectors]

I'm waiting to see how well this works out with the controller(muting, lockouts, etc). I'll be placing an order really soon.

If your looking for Lockouts you will need to get your own full Sti-R Plus. Lockouts are an Escort patented feature and you will not get them with the integration. The Integration will basically operate as a RDR/BS Redline with the AL Priority and mixed with Saavy if you add the GPS to ignore alerts under a certain speed all in one unit.

[winterbrew]

Hi Tom,

If you want to use the radar module and bluetooth module at the same time, can you daisy chain the modules together to plug them into the single C port of the CPU, or is there a splitter or pass-through type cable arrangement to hook them both up ?

Did you get any updates on which GPS antenna we can use ?

Many thanks

[BestRadarDetectors]

Radar Module connects to the Radar & GPS Port, The Bluetooth Module gets connected to the C port.
No answer yet on which GPS antennas will be on the supported list yet.

[winterbrew]

Radar Module connects to the Radar & GPS Port, The Bluetooth Module gets connected to the C port.
No answer yet on which GPS antennas will be on the supported list yet.

Great - forgot there was a seperate port for radar and GPS

[M3eagle]

If I use the bluetooth module for the initial install with 2 front sensors, will I be able to add rear functionality in the future? Will the bluetooth module and CPU both recognize the additional sensors? Is there a potential delay in alerts when using Bluetooth instead of a full hard wired system?

Thanks

[BestRadarDetectors]

If I use the bluetooth module for the initial install with 2 front sensors, will I be able to add rear functionality in the future? Will the bluetooth module and CPU both recognize the additional sensors? Is there a potential delay in alerts when using Bluetooth instead of a full hard wired system?

Thanks

There is no issue with using Bluetooth with any amount of sensors. If you connect the sensors to the CPU it will work with zero issues. There is no delay in protection if using the Bluetooth as the controller.

[melbVt]

Only if we could connect the Gps to both systems usuing the 1 airieal

[BestRadarDetectors]

Only if we could connect the Gps to both systems usuing the 1 airieal

GPS port has not bee activated yet. Last I heard AntiLaser was testing different generic GPS antennas to see which they could use. The GPS antenna will not be a AL Branded GPS but rather an inexpensive one you can get from Ebay, Etc.