A little dilemma with alp installation

[david_66]

Only problem is extension cables would go on the opposite end of the cable and require re-running those wires. In the future always start at the control box and run the wires to the rear this way if your short you can just add the extension. You can get a coupler and a straight wire but AL can not guarantee the connection. AntiLaser uses very high quality shielded and weather proof cables and a coupler and extension cable might might degrade the signal.

I'm trying to avoid re running the cables. Do you know what kind of cable antilaser uses? is Cat5, Cat5e or Cat6? also do you know what company makes them?

Thanks for the help!

[BestRadarDetectors]

I'm trying to avoid re running the cables. Do you know what kind of cable antilaser uses? is Cat5, Cat5e or Cat6? also do you know what company makes them?

Thanks for the help!

They are not standard cables. If you use a coupler make sure they are straight through and also use a straight through cable or you can damage the heads and CPU.

[david_66]

Thanks! I decided to play it safe and bought the extension cables.

[Won Hunglo]

Thanks! I decided to play it safe and bought the extension cables.

Smart move. No reason to create a problem when there is not one.