
Originally Posted by
FJR1300
Most vehicle electrical problems start out with bad ground, looks mean nothing. Best way to test your ground is via voltage drop, measure from known good ground, use the battery terminal for convenience, the other lead at the ground point you are considering.
Max reading is .5 volts, but even that is bit high in modern cars, I recommend < = .2 volts.
If you have that, the next thing to check is whether that voltage reading changes with temperature, if you have multimeter with record fumction, you can just leave it hooked up and run the engine for while,, then let it cool back down and check your max readings.
One common area that causes high voltage grounds on the entire vehicle is the negative cable where it connects to the engine block, particularly in snowbelt vehicles.
If your multimeter has an ammeter function you can take recorded readings of that also (as long as you're tapped into power source rated <= the ammeter capability)
Hth.
Connect With Us