Stalker LZ1 operators manual needed Please Help!

[BestRadarDetectors]

Found the thread you were probably looking for. Not sure if it works...

For the 9 button version.

Turn on the gun.

1. Press the “Sen” key.
2. Immediately, press the “SPEAKER” key.
3. Immediately, press two keys at the same time. The two keys are the “LOC/REL” and the “SQL”

That should get you into the internal menu. Be careful here as every button has a different function in the radar.

4. Now you can toggle between KPH and MPH by hitting the “SQUELCH” button.
5. When you have what you desire, PULL THE TRIGGER! That locks the value in



For the 7 button version

1. Remove the 4 screws holding on the top plastic cover.

2. Carefully separate the top cover from the unit.

3. With the unit facing forward as you would use the radar, locate the two jumper pins on the left circuit board. They are at the front of the unit, on the top.

4. Short the two pins together and power on the unit, then remove the jumper.

5. The LCD should read one of the following SEn 13, SEn 14, SEn 15, or SEn 16. You are now in the setup menu.

6. Press the "SQ" key to toggle between KPH and MPH. When KPH mode is active, the letter M (presumably Metric) will be displayed on the top right of the screen.

7. Power off the unit. Your settings have been saved.

Let us know if these instructions above work. And here is the Manual.... Stalker lidarmanual.pdf

[winterbrew]

Okay so far thankyou for all your input, BRD Shane & RadarRob!
Strange on RDF well I cant snoop into the site I found this in google clearly stating there is a how to change from KPH to MPH on RDF

My understanding is that the above can only be done on the Euro models originally sold in km/h, and also the Gen I doesn't have the button that you need to press in the instructions that BRD posted. As Rob said, I thought the USA models cannot be converted by the user, although I don't have a Gen II to try the button combination to see if it works, and I don't know if I want to risk trying the 7 button instructions

[melbVt]

Thanks BRD you pointed me in correct direction Its was done by pressing a combination of just pressing buttons For real! I tried power on Time/Distance then Max then pulled trigger then power off then kept trying different combo's and wow it's now in KPH and stupid silly me wasn't alert to combination pressed,
So yes somehow Ive changed it as last night it was in MPH and now i shot a car and now it reads Km ,
Ive been in contact with the stalker service centre they can certify/ and update to latest release of firmware to stop the E03 msg
Last night I detected 1 jammer only over 2hrs of use!
My Bel Stir+ I only have the radar laser antenna plugged in no Z4's or shifter pro's and last night I got alert from 1200FT away and its behind mesh!
Thanku RadarRob, BRD , Winterbrew I keep on the lookout for info etc ,
I LOVE IT ,
GONE SHOOTING BACK SOON !

My understanding is that the above can only be done on the Euro models originally sold in km/h, and also the Gen I doesn't have the button that you need to press in the instructions that BRD posted. As Rob said, I thought the USA models cannot be converted by the user, although I don't have a Gen II to try the button combination to see if it works, and I don't know if I want to risk trying the 7 button instructions

[winterbrew]

Good news - I might open up my Gen I and have a play now

[melbVt]

Good news - I might open up my Gen I and have a play now

Sorry to get you all excited FAIL no luck LOL! It is still in MPH yet I can see KPH when I turn it on, I tagged a cars in 60KM zone and was averaging 35 to 45MPH = 60 to 70MPH

Now I tried taking photo to show difference as I don't have squelch etc found a good pic of th3e same keys to give everyone a clearer Idea,
I think I mite need open it up and try the pin thing ,
Will sus it out as in the box came sheet paper saying it has Metric operation Setup menu selectable,

[winterbrew]

melbVt do you have the Gen I like as shown in the picture above, or the Gen II with gold buttons (and the extra button) ?

Mine's a Gen I as per the picture above

[winterbrew]

Here's a vid from one of the RDF guys on how to change the EU km/h version to measure in mph ;

[melbVt]

melbVt do you have the Gen I like as shown in the picture above, or the Gen II with gold buttons (and the extra button) ?

Mine's a Gen I as per the picture above

Thats is exactly the same as mine yes it must be a Gen 1

[melbVt]

#3 CHEERs for winterbrew! CHEERS Cheers Im in KPH

[winterbrew]

#3 CHEERs for winterbrew! CHEERS Cheers Im in KPH

So just to summarise;

You've got a Gen I with flat buttons (no menu button), as per your post above
You followed the YouTube video, but pushed the 'Time/Dist' button on the Gen I, instead of the 'menu' button on the Gen II in the key press sequence
You're now in km/h