VERY IMPORTANT - Preparation for 4/8 ALP Firmware

[BestRadarDetectors]

Can we put the 2 downloaded files at the same time on the Usb key , then proceed to the control box .

Or is it advised to do them separately , one at a time , U2793XXX.bin first ,
then clean the usb key , insert the UCSET.bin on the key and proceed ?

Thanks.

You can put all 3 files CPU Firmware, Control Module Firmware & Setup File all on the same USB drive. CPU Firmware will go first and once restarted turn off with the power button and turn on and it will move to the next file.

[Holla]

You can put all 3 files CPU Firmware, Control Module Firmware & Setup File all on the same USB drive. CPU Firmware will go first and once restarted turn off with the power button and turn on and it will move to the next file.

SO a simple restart is needed to suck each file off the USB stick--Cause I will have all 3 on one. Then I will have a dedicated USB with only the parking sensor set up "Just in case"

[awj223]

SO a simple restart is needed to suck each file off the USB stick--Cause I will have all 3 on one. Then I will have a dedicated USB with only the parking sensor set up "Just in case"

I do the same. I don't see a need for the privacy mode that requires a key on the USB stick in order to start up, since if pulled over, I'd just put the parking sensor USB stick in there and do a quick reprogram.

EDIT: I wish there were some way to lock out the privacy mode, unless a special key combination is entered. A (small) worry of mine is that someone who's rummaging through my car might be able to put my ALP into privacy mode and remove the USB stick, thereby making my ALP useless (for example, what if the car gets towed and the cops want to be evil?).