Requests for Future Improvements with the AL Priority

[BestRadarDetectors]

So some of mine which have already been listed (but saying them again is worth mentioning to show the numbers behind any given idea)...

(1) When ALP does the self-check and finds an error, it would be great if it told us what port "F1/F2/F3/R1/R2" was at fault... instead of having to troubleshoot ourselves. This is especially important for people who have 4-5 heads.

(2) Have a self-check (if possible) of the radar antenna (akin to a 'service required') to possibly help in identifying when that is going bad

(3)Absolutely am behind:
-Allowing multiple set-up profiles on ALP connect (stored on in app/on device).
-That way we can (at the touch of a button) change the profiles when we want and be able to see/review them

(3b)Similar to the above, it would be great to be able to setup the ALP right from the ALP Connect. In other words, have all the settings on the app so they can be changed on the fly like we can with radar detectors; Even if after changing files the ALP requires "restarting before changes take effect," like on a computer.

1. Normally it does if it can determine the issue with a specific sensor it will tell you which head is having the failure.
2. The Radar Antennas are self contained and we only report the responses from the Radar Detectors themselves. If there is a connection issue or the head stops responding the ALP will already tell you that your "Radar Antenna is Disconnected"
3. As I mentioned above lots of cool stuff is coming and you will have to stay tuned/
3b. Eventually ALL settings will be done via ALP Connect and Setup Files online can be eliminated. There are only so many projects we can do at once and eventually it will get there.