AL Priority Firmware Update History (Running History)

[midd]

Just noticed there is no RDR option when you select Net Radar as the detector unit.

[BestRadarDetectors]

Just noticed there is no RDR option when you select Net Radar as the detector unit.

Its not really needed.. We did not want anything to slow down filtering. KA False Alerts are pretty rare and you can use BS if you want to avoid any really close Cobra false KA's.

[midd]

ok just wanted to make sure it was disabled, that's all.



Now I'm getting GPS antenna disconnected and rear radar antenna disconnected alerts. I've unplugged each and reseated them but am still getting the alerts. I noticed the green light on the RG3 module is not lit.

[BestRadarDetectors]

ok just wanted to make sure it was disabled, that's all.



Now I'm getting GPS antenna disconnected and rear radar antenna disconnected alerts. I've unplugged each and reseated them but am still getting the alerts. I noticed the green light on the RG3 module is not lit.

GPS Antenna needs to be connected to RG3 Module's GPS Port and Antenna 1 in the Front 1 & Rear Ports if you have both antennas. You also need to activate both on the setup page. Each antenna was tested before shipping so you have a configuration issue. Did you also connect the Power Splitter cable?

[modsl55amg]

Tom/BRD, if I download the new ALP Control Box firmware release 5.2.5/6.8 ONLY, will it wipe out my present Configuration Profiles A/B/C, therefore requiring me to reload my Configuration Profiles A/B/C ?

Bump

[midd]

I'll check again but I know for a fact GPS is in the right spot. I asked about it on RDF.

[BestRadarDetectors]

Bump

Possibly. You should always have your settings handy when updating firmware.

[midd]

Lmao! The cable from the control box somehow disconnected. All is well now! Lol

[modsl55amg]

Possibly. You should always have your settings handy when updating firmware.

Thanks. I'll load everything to make sure.

[SurrealOne]

So glad i got the BT module Ver 2.0 I just downloaded the APP connected to module FW update done OTA. All done and complete in less then 10min.