AL Priority Firmware Update History (Running History)

[BestRadarDetectors]

done the latest fw thats ok, but do i still need to update the original not used controller, using bt, gps,and apple phone,not running the the new HIFI ?

If you are using BT there is no need to update the regular controllers if you are not using them.

[FatLazyDog]

Not seeing the RG Plugin 2 being specifically called out on the web site as a new version. Is it available to order and I am simply missing it somehow?

[BestRadarDetectors]

Not seeing the RG Plugin 2 being specifically called out on the web site as a new version. Is it available to order and I am simply missing it somehow?

Not yet... We will add it shortly. We are still burning through old inventory which is for the Sti-R Plus & 9500CI's antennas.

[imjammin]

I updated my firmware to the latest, and now the warm up self test never passes. Any idea why this would happen? It behaves like I am near a wall when I start it up. It just goes red and beeps continuously.

[BestRadarDetectors]

I updated my firmware to the latest, and now the warm up self test never passes. Any idea why this would happen? It behaves like I am near a wall when I start it up. It just goes red and beeps continuously.

Probably because the new self check is more detailed to catch issues and not let you drive off thinking you are protected if it finds an issue. If its beeping a continuous 2 beeps and does not stop its either because all your sensors on one side of the vehicle are blocked or you have a sensor failure. You need to disconnect one sensor at a time until the alert stops and you will be able to troubleshoot which sensor is tripping the error.

[wirelessandy]

No, The Bug noted above with the latest update only effected the original generation CPU's.

Confirmed. Just installed rear sensors tonight. Rear hits show as red with 1st gen CPU.

[BestRadarDetectors]

Next Update due out on 5/6 will have a fix for this and add a few more things.

[modsl55amg]

Next Update due out on 5/6 will have a fix for this and add a few more things.

Tom, I have not yet downloaded the 3/24/15 firmware upgrades to my ALP system due to the problems some people experienced. When the 5/6/15 Update becomes available, can I just download it to my ALP system, or should I first download the 3/24/15 Upgrade, then download the 5/6/15 Upgrade?

Thanks.

[BestRadarDetectors]

Tom, I have not yet downloaded the 3/24/15 firmware upgrades to my ALP system due to the problems some people experienced. When the 5/6/15 Update becomes available, can I just download it to my ALP system, or should I first download the 3/24/15 Upgrade, then download the 5/6/15 Upgrade?

Thanks.

You can go straight to the 5/16 update. Updates do not stack so you only need the latest update to be current.

[wirelessandy]

I see the 5.1.2 update is out. Changes?