AL Priority Firmware Update History (Running History)

[kimberdan]

There was never a blinking light when hit. You were probably in Pro Mode and in Pro Mode the light will flicker based on the received signal strenght.

Tom, Even when i go back and look at my videos it show the LED flash red when i get hit in the front with the Dragon.. Now when i boot the system up the color the LED flashs is Blue and thats it...Im i crazy? LoL

[syrinx]

In the CPU, is there a buzzer to warn me? Or should I buy the HiFi module?

About the warm-up time without jamming, is it possible to set to more than 60 seconds?

Thanks for help.

[BestRadarDetectors]

In the CPU, is there a buzzer to warn me? Or should I buy the HiFi module?

About the warm-up time without jamming, is it possible to set to more than 60 seconds?

Thanks for help.

The standard controller has a speaker built into the controller. When you turn it on your should hear the startup tones from the speaker inside the controller. Warm-up can only be set to be skipped or 60 seconds.

[syrinx]

Is it possible to have an autostart of the CPU without (BT)? The CPU is in the trunk!

[BestRadarDetectors]

You need either a controller or BT connected to turn on the system. If you have CPU connected to a switched power circuit it will turn on and off w I think the key. If using BT the phone must be running for it to start up.

Sent from my SM-G928T using Tapatalk

[BestRadarDetectors]

Details of the 5.1.4 update: (10/08/15)

Control Box Firmware update: Release 5.1.4/6.4

1. Various bug-fixes and stability improvements (USB, GPS etc.).
2. Algorithm tuned for better support of some LIDARs.
3. New Option in yellow menu is available (Yellow-9) “Performance Tests”. This Option will open a sub-menu for all performance tests available in the ALP. Option is available only if GPS Antenna is connected and if HiFi Control Set is used.
4. New Performance Test has been added “Lap Time” (Yellow-9). This will temporary turn your ALP system into a GPS Lap Time stopwatch and measure your vehicles time over a full lap. Time in minutes and seconds is given as a result. Mode only works if GPS Antenna is connected and if HiFi Control Set is used.
5. Improved filtering against foreign LCC equipped cars (Volvo, Infinity, VW, Honda, Mazda,…). LCC cars especially behind you will no longer start a false alert
6. Option Manual Sensors Check (Yellow-6) will perform memorize sensors similarly like the Restore Defaults option but without the defaulting your settings.

[awj223]

Details of the 5.1.4 update: (10/08/15)

Control Box Firmware update: Release 5.1.4/6.4

1. Various bug-fixes and stability improvements (USB, GPS etc.).
2. Algorithm tuned for better support of some LIDARs.
3. New Option in yellow menu is available (Yellow-9) “Performance Tests”. This Option will open a sub-menu for all performance tests available in the ALP. Option is available only if GPS Antenna is connected and if HiFi Control Set is used.
4. New Performance Test has been added “Lap Time” (Yellow-9). This will temporary turn your ALP system into a GPS Lap Time stopwatch and measure your vehicles time over a full lap. Time in minutes and seconds is given as a result. Mode only works if GPS Antenna is connected and if HiFi Control Set is used.
5. Improved filtering against foreign LCC equipped cars (Volvo, Infinity, VW, Honda, Mazda,…). LCC cars especially behind you will no longer start a false alert
6. Option Manual Sensors Check (Yellow-6) will perform memorize sensors similarly like the Restore Defaults option but without the defaulting your settings.

The main site to regenerate the configuration files (which I always like to do when a new FW is released to make sure I'm not missing any new features) appears to have a sort of bug. When you load a current version of the configuration file (with all of the options that currently exist in the system), it will happily generate a new setup.alp file for you. But if you load an older setup.alp with the intention of taking all of your old features, selecting your desired configuration on anything new, and generating a new setup.alp, then after you click "Save & Download", it goes back to the firmware setup page instead of the page to download the newly generated setup.alp file. Therefore, to generate a new setup.alp file, I had to load the old configuration in one browser tab, start selecting the options in a second browser tab, and switch between the two tabs to make sure that both of them were configured the same.

[BestRadarDetectors]

The main site to regenerate the configuration files (which I always like to do when a new FW is released to make sure I'm not missing any new features) appears to have a sort of bug. When you load a current version of the configuration file (with all of the options that currently exist in the system), it will happily generate a new setup.alp file for you. But if you load an older setup.alp with the intention of taking all of your old features, selecting your desired configuration on anything new, and generating a new setup.alp, then after you click "Save & Download", it goes back to the firmware setup page instead of the page to download the newly generated setup.alp file.

There have been new features added and even some more on the way. Its best to create a new file from scratch and only use an existing file if you are only making changes not between firmware updates.

[SurrealOne]

Can I do this update with my BT module connected android phone?

[BestRadarDetectors]

Can I do this update with my BT module connected android phone?

If you have a compatible BT module then yes when its released late this evening you will be able to update your firmware from ALP Connect using the Firmware Update button on the Android version.