AL Priority Firmware Update History (Running History)

[BestRadarDetectors]

Tom, Just so i understand, Will i now be able to have the LED stay lit while in defence mode or does it just change it so that when you getting painted the led comes on and stays on instead of flash? I ask because i set it to solid and dim and all i got was a solid blue light when hit with Laser and then it went back off.

In constant mode the LED will stay on and not blink in defense mode. You also need to he running the current 4.4.1 or newer firmware.

[kimberdan]

In constant mode the LED will stay on and not blink in defense mode. You also need to he running the current 4.4.1 or newer firmware.

Ok yes i have the 4.4.1... Ill try again tomorrow and see if i have any luck, Like i said i did the up date and all that and the light would come on blue for apx 10 seconds and then go off. when i hit it with lidar it went blue and stayed that way until the alert stopped.

[BestRadarDetectors]

Ok yes i have the 4.4.1... Ill try again tomorrow and see if i have any luck, Like i said i did the up date and all that and the light would come on blue for apx 10 seconds and then go off. when i hit it with lidar it went blue and stayed that way until the alert stopped.

Then you are in dark mode. Go back to the ALP Setup site and make sure you are in Constant Mode or Constant Dim Mode.

[kimberdan]

Then you are in dark mode. Go back to the ALP Setup site and make sure you are in Constant Mode or Constant Dim Mode.

OK ill mess with it tomorrow, Ive been up since 4am and im not going to mess with it now or i can promise something will end up broken LoL.. Ill check back with you tomorrow and let you know what i come up with ....
Thank you again Tom. You are a true honest good person, I appreciate you taking the time to help when help is needed.

[BestRadarDetectors]

New Firmware Update Available

Details of the 4.4.2 update (10/21/14)

1. Improved Error signalization.
2. Improved and expanded various LIDAR routines.
3. New Blue Menu

What is a the new Blue Menu?

After you have firmware extended your system to the latest firmware some options can be changed manually over a basic Control Set inside the Blue Menu.

Press MENU and hold as long as LED light turns from Yellow to Blue and you can manually change these blue-menu options:

1. PDC/DLI/LID option setup
Pres MENU/Next once (1) when in a blue menu, then press Enter (LED will turn white when you enter submenu)
Press MENU/Next once, twice, three, four, five, six, seven, eight, nine or ten times depending on your preference (choose below) then press Enter to activate.
1 – for Parking detection only
2 – for PDC&DLI detection only
3 – for 3 seconds LID defense
4 – for 4 seconds LID defense
5, 6, 7, 8,
9 – for 9 seconds LID defense
10 – for time unlimited LID defense

2. PDC disable
Pres MENU/Next twice (2) when in a blue menu, then press Enter to enable/disable parking detection (PDC)

3. PRO MODE
Press MENU/Next 3 times when in a blue menu, then press Enter to enable/disable PRO MODE
In Pro Mode LED is blinking during LID alert only when being targeted.

4. SKIP WARM-UP
Pres MENU/Next 4 times when in a blue menu, then press Enter to enable/disable Skip first warm up

Don't worry ALP Connect users more functionality will be coming to ALP Connect in the future.

[kasher1979]

Actually I said gunS but I think it was only one gun .

[BestRadarDetectors]

Actually I said gunS but I think it was only one gun .

Yes, There were several improvements and that was only one of them.

[awj223]

Press MENU and hold as long as LED light turns from Yellow to Blue and you can manually change these blue-menu options:

1. PDC/DLI/LID option setup
Pres MENU/Next once (1) when in a blue menu, then press Enter (LED will turn white when you enter submenu)
Press MENU/Next once, twice, three, four, five, six, seven, eight, nine or ten times depending on your preference (choose below) then press Enter to activate.
1 – for Parking detection only
2 – for PDC&DLI detection only
3 – for 3 seconds LID defense
4 – for 4 seconds LID defense
5, 6, 7, 8,
9 – for 9 seconds LID defense
10 – for time unlimited LID defense

If you use options 3-10, what happens to radar detection? Does it remain the same as it was last configured by a configuration file? The email I just got explains things a little bit differently:

1 – for Parking detection only (no lidar or radar detection)
2 – for PDC&DLI (parking, lidar & radar detection active)
3 – for 3 seconds LID defense (detection & defense active)
4 – for 4 seconds LID defense (detection & defense active)
5, 6, 7, 8,
9 – for 9 seconds LID defense (detection & defense active)
10 – for time unlimited LID defense (detection & defense active)

[BestRadarDetectors]

If you use options 3-10, what happens to radar detection? Does it remain the same as it was last configured by a configuration file?

LID Time does not change your Radar Settings that you already previously set.

[awj223]

I take it that this applies for all options except (1), correct? Or is it actually possible to have it in PDC-only mode on the LIDAR sensor side and radar detection on (which, curiously, is NOT an option when generating setup files)?

And if (1) turns off radar detection altogether, is the setting still "memorized" internally so that when I turned LID/DLI back on, it will detect radar again?