Present has arrived

[BestRadarDetectors]

Install and testing soon....purchased and shipped Friday, arrived on Monday. Excellent service!

Please remember to visit http://www.alpupdate.com and you will need 2 updates (Main Firmware & Control Set Firmware) and 1 setup file. Initially use the Control Module (Not Bluetooth) and can put all 3 files on a blank USB Memory stick and insert the Memory stick and turn on the ALP. It will first update the firmware (Around 60 seconds or so) and then it will reboot. Once powered back on turn it off using the power button on the control module and immediately turn back on. Once powered back on it will update the control set and then load your settings file.

You are then good to go and you can switch to the Bluetooth Module if you want. Once the heads are all installed in ALP Connect under settings hit the Reset Defaults button so that the ALP will memorize your sensor positions. Let us know if you have any issues.