AL Priority Radar Package (ALP RG Module + Beltronics Sti-R Plus) BEE III

[beingaware]

I have never seen a long lag like this and you can see that from any of the videos I posted. Slight delay but nothing like in your video. One thing I did notice is that you have the Sti-R Plus antenna facing forward and the Redline antenna is in the rear. Try turning the Sti-R Plus antenna facing away from you because you might be over driving the antenna being so close and aiming directly into the horn.

ST was firing the gun away from the RD with his body in the way.
Shouldn't matter about over driving anyway.
Moment the LO + RF loop is excited, doesn't matter if its 0db or -150db, will have the same reaction in the software on the RD.
I say the lag is between the BT device and the software.

Fire gun ---- rd figures out that it was hit, sends data to bt mod, bt then sends a packet to the mobile, the software then needs to understand what its being told and load up the correct alert.
To be honest, I say the lag is in the BT to software stage.
You have 3 cpus with ALP, the sti cpu, the bt cpu and then phones vs the 1 cpu in the redline.
Naturally there will be some lag but 2.4 seconds is a bit too long IMO.

Maybe we need a Android version to come out...