New ALP CPU constantly beeping and red flashing led

[BestRadarDetectors]

From what I am reading it is not a lead problem but just do not plug in different makes of heads to different CPU's ?

That is a Given not to try to connect a Blinder or Laser Interceptor head to your CPU but the G9 Heads are fine to connect to the AL Priority just use the wires that are on the heads already. Don't mix the AL Priority wiring with the G9 heads.

[beingaware]

That is a Given not to try to connect a Blinder or Laser Interceptor head to your CPU but the G9 Heads are fine to connect to the AL Priority just use the wires that are on the heads already. Don't mix the AL Priority wiring with the G9 heads.

Maybe they need to put that in the manual.
I did read through it and could not find any mention re the G9 cabling.

I knew using other brands or older gen e.g. g8 = bad but there really needs to be mention of this.

Would be nice to see in the manual.
"Even though the ALP cpu is backwards compatable with the G9 heads, using the ALP cabling to connect to the G9 heads will result in failure of the head.

Because, I now have to buy a new head which I am slightly annoyed about...

[BestRadarDetectors]

Maybe they need to put that in the manual.
I did read through it and could not find any mention re the G9 cabling.

I knew using other brands or older gen e.g. g8 = bad but there really needs to be mention of this.

Would be nice to see in the manual.
"Even though the ALP cpu is backwards compatable with the G9 heads, using the ALP cabling to connect to the G9 heads will result in failure of the head.

Because, I now have to buy a new head which I am slightly annoyed about...

Of course I will mention it to them when I speak with them on Monday but you are the only one that so far used an AL Priority Sensor cable on an older G9 head. You should also take this issue up with your dealer that sold you the product. If it was one of our customers that had an issue we would have handled the situation in a way that you would have been very happy with. Don't give up contacting DGC if you purchased the system from him and seeing what he can do to help you.

[beingaware]

Of course I will mention it to them when I speak with them on Monday but you are the only one that so far used an AL Priority Sensor cable on an older G9 head. You should also take this issue up with your dealer that sold you the product. If it was one of our customers that had an issue we would have handled the situation in a way that you would have been very happy with. Don't give up contacting DGC if you purchased the system from him and seeing what he can do to help you.

Lets hope Tim gives me the same top notch service like BRD.
I am sure he will, he has never let me down in the past. .

[BestRadarDetectors]

Lets hope Tim gives me the same top notch service like BRD.
I am sure he will, he has never let me down in the past. .

Spoke with AntiLaser regarding your issue. They want to know if you checked the pins on the harness to make sure that one of the pins did not bend and cause a short because they should be wired the same as the AL Priority and using the wrong cable should not have caused an issue.

"We have not changed AL Connecting cables or Extension cables in the past four years so our old cables should work with new parts and vice versa."

Tom

[beingaware]

Spoke with AntiLaser regarding your issue. They want to know if you checked the pins on the harness to make sure that one of the pins did not bend and cause a short because they should be wired the same as the AL Priority and using the wrong cable should not have caused an issue.

"We have not changed AL Connecting cables or Extension cables in the past four years so our old cables should work with new parts and vice versa."

Tom

The wires look different between the ALP cable and my G9RX2 cable...
The colours etc.
The pins look fine.

I am just waiting for my mates to return my LI kit that I lent out, so I can send my unit back to DGC.

[BestRadarDetectors]

The wires look different between the ALP cable and my G9RX2 cable...
The colours etc.
The pins look fine.

I am just waiting for my mates to return my LI kit that I lent out, so I can send my unit back to DGC.

Did you have an original G9RX or one of those bogus Taiwan clones?