New ALP CPU constantly beeping and red flashing led

[beingaware]

Well my unit is new.

Issue is, when it turns on, I get a flashing red led and it goes beep beep, gap then led flashes and then beep beep, and repeat.
It happily does a firmware update + settings load but thats it.
Even with no heads connect, it just does the above.

Any suggestions?
I really hope my new ALP wasn't DOA...

[dinkydi]

is there a reset function,aint got ALP, but if they beeps repeat could be error code fault

[beingaware]

is there a reset function,aint got ALP, but if they beeps repeat could be error code fault

The beeps suggest head fault or disconnected head.
But even with the first head I ever tested connected, it still does it.
And it won't let me factory reset it which is frustrating.

[dinkydi]

best wait to USA wakes up, or give deano/wb a hoy

[shanetrainST]

You have had only 5mins and you have broken it lol, you crack me up aware I have no other suggestion that you have not already tried, sorry

[winterbrew]

Look at page 14 in the manual, it tells you what all the beeps mean.

[Holla]

Wait till BRD wakes up in a few hours and he will get you straight )

[beingaware]

You have had only 5mins and you have broken it lol, you crack me up aware I have no other suggestion that you have not already tried, sorry

Haha I didn''t do anything to it.
Just plugged it in and turned it on.
Wasted a whole day!!!!!!

Oh wells, as lest the car is tidy now, no more random cables running around lol.

Look at page 14 in the manual, it tells you what all the beeps mean.

It suggests faulty head or cable unplugged.
Even with the ALP head connected, I still get the beeping party.
I am trying to factory reset it but it won't allow me to, just keeps beeping away.

Is there any way to factory reset via the usb or on boot up rather then trying to get into the menu?

I hope I don't have to send the unit back to Perth...

[beingaware]

Figured it out.
The new ALP cable is faulty.
It just toasted my G9 cpu.
A bit pissed about it, but at lest I know the cause.

[deano]

it will beep when there are no heads connected its letting you know that there is a problem ...there is a reset page 11 in the manual I would have to type a full page to tell you how

this is why I wanted to know about the heads getting warm as im already on my 2nd CPU my first CPU died would not power up i had voltage i thought may be the CPU or handset ...i went back to the shop tim gave me a brand new CPU i quickly plugged her in and every thing worked

best to try one head at a time as seams like your cpu is still working maybe one of the heads or like you say the lead for the head has failed

ps there is a small fuse inside the CPU best not to open it up though as one of the cover screws is located under the serial number sticker best to send back the cpu first ...if they don't entertain you then go ahead and open it up