Close
Page 1 of 6 123 ... LastLast
Results 1 to 10 of 60

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member beingaware's Avatar
    Join Date
    Nov 2013
    Location
    FIFO
    Posts
    2,125
    Thanks Given
    1,514
    Thanked 2,070 Times in 973 Posts

    New ALP CPU constantly beeping and red flashing led

    Well my unit is new.

    Issue is, when it turns on, I get a flashing red led and it goes beep beep, gap then led flashes and then beep beep, and repeat.
    It happily does a firmware update + settings load but thats it.
    Even with no heads connect, it just does the above.

    Any suggestions?
    I really hope my new ALP wasn't DOA...
    Last edited by beingaware; 12-07-2013 at 01:01 AM.
    Defence: ALP x 3 Front / 2 x Angled Rears | Stinger VIP Radar x 2 Patch Panels / Stinger VIP LIDAR (testing)| Escort Redline 2013 int | Escort Redline MRCT 2015 int | STI-R+ | V1 (testing) | Veil
    CM Testing: Spectre RDD Mrk IV | UltraLyte LR UX 125pps | UltraLyte LRB 125pps | Stalker LZ1 | ProLaser 2 (The Hole Finder) | Kustom Talon 2 KA | Bushnell Velocity K Band
    Intelligence: Front/Rear Dash Cam | 477MHz 2-WAY Radio
    Want your jammer setup tested? Want to confirm your RD is stealth? Send me a PM.
    <a href=http://www.raletc.com target=_blank rel=nofollow>http://www.raletc.com</a>

  2. #2
    Senior Member dinkydi's Avatar
    Join Date
    Nov 2013
    Location
    cosmos
    Posts
    3,739
    Thanks Given
    4,432
    Thanked 1,222 Times in 911 Posts
    is there a reset function,aint got ALP, but if they beeps repeat could be error code fault

  3. #3
    Senior Member beingaware's Avatar
    Join Date
    Nov 2013
    Location
    FIFO
    Posts
    2,125
    Thanks Given
    1,514
    Thanked 2,070 Times in 973 Posts
    Quote Originally Posted by dinkydi View Post
    is there a reset function,aint got ALP, but if they beeps repeat could be error code fault
    The beeps suggest head fault or disconnected head.
    But even with the first head I ever tested connected, it still does it.
    And it won't let me factory reset it which is frustrating.
    Defence: ALP x 3 Front / 2 x Angled Rears | Stinger VIP Radar x 2 Patch Panels / Stinger VIP LIDAR (testing)| Escort Redline 2013 int | Escort Redline MRCT 2015 int | STI-R+ | V1 (testing) | Veil
    CM Testing: Spectre RDD Mrk IV | UltraLyte LR UX 125pps | UltraLyte LRB 125pps | Stalker LZ1 | ProLaser 2 (The Hole Finder) | Kustom Talon 2 KA | Bushnell Velocity K Band
    Intelligence: Front/Rear Dash Cam | 477MHz 2-WAY Radio
    Want your jammer setup tested? Want to confirm your RD is stealth? Send me a PM.
    <a href=http://www.raletc.com target=_blank rel=nofollow>http://www.raletc.com</a>

  4. #4
    Senior Member dinkydi's Avatar
    Join Date
    Nov 2013
    Location
    cosmos
    Posts
    3,739
    Thanks Given
    4,432
    Thanked 1,222 Times in 911 Posts
    best wait to USA wakes up, or give deano/wb a hoy

  5. #5
    Senior Member shanetrainST's Avatar
    Join Date
    Nov 2013
    Location
    Australia
    Posts
    1,870
    Thanks Given
    1,401
    Thanked 1,771 Times in 849 Posts
    You have had only 5mins and you have broken it lol, you crack me up aware I have no other suggestion that you have not already tried, sorry
    Last edited by shanetrainST; 12-07-2013 at 01:48 AM.

  6. #6
    Senior Member beingaware's Avatar
    Join Date
    Nov 2013
    Location
    FIFO
    Posts
    2,125
    Thanks Given
    1,514
    Thanked 2,070 Times in 973 Posts
    Quote Originally Posted by shanetrainST View Post
    You have had only 5mins and you have broken it lol, you crack me up aware I have no other suggestion that you have not already tried, sorry
    Haha I didn''t do anything to it.
    Just plugged it in and turned it on.
    Wasted a whole day!!!!!!

    Oh wells, as lest the car is tidy now, no more random cables running around lol.

    Quote Originally Posted by winterbrew View Post
    Look at page 14 in the manual, it tells you what all the beeps mean.
    It suggests faulty head or cable unplugged.
    Even with the ALP head connected, I still get the beeping party.
    I am trying to factory reset it but it won't allow me to, just keeps beeping away.

    Is there any way to factory reset via the usb or on boot up rather then trying to get into the menu?

    I hope I don't have to send the unit back to Perth...
    Defence: ALP x 3 Front / 2 x Angled Rears | Stinger VIP Radar x 2 Patch Panels / Stinger VIP LIDAR (testing)| Escort Redline 2013 int | Escort Redline MRCT 2015 int | STI-R+ | V1 (testing) | Veil
    CM Testing: Spectre RDD Mrk IV | UltraLyte LR UX 125pps | UltraLyte LRB 125pps | Stalker LZ1 | ProLaser 2 (The Hole Finder) | Kustom Talon 2 KA | Bushnell Velocity K Band
    Intelligence: Front/Rear Dash Cam | 477MHz 2-WAY Radio
    Want your jammer setup tested? Want to confirm your RD is stealth? Send me a PM.
    <a href=http://www.raletc.com target=_blank rel=nofollow>http://www.raletc.com</a>

  7. #7
    Senior Member beingaware's Avatar
    Join Date
    Nov 2013
    Location
    FIFO
    Posts
    2,125
    Thanks Given
    1,514
    Thanked 2,070 Times in 973 Posts
    Figured it out in the end.
    Took me toasting my G9 CPU to figure it out haha.
    Damn ALP lead is different, thus it will not work with G9 heads.
    G9 cable for G9 heads.
    ALP cable for ALP heads.
    Oh wells, it all works well now .
    Defence: ALP x 3 Front / 2 x Angled Rears | Stinger VIP Radar x 2 Patch Panels / Stinger VIP LIDAR (testing)| Escort Redline 2013 int | Escort Redline MRCT 2015 int | STI-R+ | V1 (testing) | Veil
    CM Testing: Spectre RDD Mrk IV | UltraLyte LR UX 125pps | UltraLyte LRB 125pps | Stalker LZ1 | ProLaser 2 (The Hole Finder) | Kustom Talon 2 KA | Bushnell Velocity K Band
    Intelligence: Front/Rear Dash Cam | 477MHz 2-WAY Radio
    Want your jammer setup tested? Want to confirm your RD is stealth? Send me a PM.
    <a href=http://www.raletc.com target=_blank rel=nofollow>http://www.raletc.com</a>

  8. #8
    Moderator winterbrew's Avatar
    Join Date
    Nov 2013
    Location
    Western Australia
    Posts
    1,803
    Thanks Given
    1,850
    Thanked 1,697 Times in 929 Posts
    Look at page 14 in the manual, it tells you what all the beeps mean.
    2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |

  9. #9
    Senior Member Holla's Avatar
    Join Date
    Nov 2013
    Location
    Alaska
    Posts
    562
    Thanks Given
    92
    Thanked 275 Times in 172 Posts
    Wait till BRD wakes up in a few hours and he will get you straight )

  10. #10
    Senior Member beingaware's Avatar
    Join Date
    Nov 2013
    Location
    FIFO
    Posts
    2,125
    Thanks Given
    1,514
    Thanked 2,070 Times in 973 Posts
    Figured it out.
    The new ALP cable is faulty.
    It just toasted my G9 cpu.
    A bit pissed about it, but at lest I know the cause.
    Defence: ALP x 3 Front / 2 x Angled Rears | Stinger VIP Radar x 2 Patch Panels / Stinger VIP LIDAR (testing)| Escort Redline 2013 int | Escort Redline MRCT 2015 int | STI-R+ | V1 (testing) | Veil
    CM Testing: Spectre RDD Mrk IV | UltraLyte LR UX 125pps | UltraLyte LRB 125pps | Stalker LZ1 | ProLaser 2 (The Hole Finder) | Kustom Talon 2 KA | Bushnell Velocity K Band
    Intelligence: Front/Rear Dash Cam | 477MHz 2-WAY Radio
    Want your jammer setup tested? Want to confirm your RD is stealth? Send me a PM.
    <a href=http://www.raletc.com target=_blank rel=nofollow>http://www.raletc.com</a>

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •