AL Priority - What Have I Been Hit By?

[dukes]

I was able to follow the instruction and created the setup.alp file on my flash drive. I plugged the flash drive in my computer and went to http://www.alpriorityupdate.com/Setup and click the browse button, found the file file and clicked upload.
I can see my current configuration settings but nothing about any stats. What am I missing here?

Go here instead of setup.

http://www.alpriorityupdate.com/Statistics

[indytoatl]

I rode past a leo today and got a laser alert on Vitronic Poliscan but I didn't see any police activity inside or outside the car. Any idea what other device would trigger this frequency?
I also got hit by Georgia State Patrol with the DragonEye near Conyers, GA on i20 east.


Device information

Serial number XXXXXXX
Firmware version 4.3.6
Region North America
Power Cycles 334
Control Set FW version 3.2
Control Set HW version 1
Connected sensors

Connected sensors when manually memorized Front2, Rear1, Rear2
Connected sensor (actual) Front2, Rear1, Rear2
Settings

Audio Volume 5
Parking detection range 3
Silent Power-up Disabled
Dark Mode Dimmed
Parking enabled sensors Front1, Front2, Front3, Rear1, Rear2
GPS Antenna None
PDC Speed Limit NONE
Working mode Parking and Laser Interference Defense
Pro mode Disabled
LID Speed Limit NONE
Radar Antenna Model Not Connected
Radar Settings
LID Time Unlimited – Test purposes
Specific LID settings

Vitronic Poliscan
Speed scanner Enabled
Unicam Camera
Section speed control All sensors ON
NJL SCS
Speed-laser Enabled
Riegl
Speed-laser Enabled
Trafic Observer
Speed scanner Enabled
Stalker
Speed-laser Maximum Power
Alerts by Source Speed-laser

Marksman and UltraLyte 0
Atlanta SpeedLaser Stealth 0
Kustom ProLaser 1 0
Kustom ProLaser & ProLite 2
Redspeed SpeedGuard 0
Riegl 0
Stalker 0
LTI Truspeed 0
Unipar - SL700 0
NJL SCS 101 & 102 0
Jenoptik – Laveg 0
Leivtec XV 2&3 0
Laser Ally 1
Error Sensitive Lasers

Jenoptik LaserPatrol 0
Jenoptik TraffiPatrol XR 0
ProLaser 2 & Atlanta SpeedLaser 0
Speed Section Control

Camea - IR Camera 0
Speed Scanner

Traffic Observer 0
Vitronic Poliscan 1
Radar

K-band 0
Ka-band 0
X-band 0
POP 0
MultaRadar CD 0
Print

[64pvolvo1800]

Infinity does it to mine

[indytoatl]

Is there a way to tell from your iPhone if you were hit with front or rear laser other than the real-time display?

[indytoatl]

Thanks, I disabled the poliscan.

[BestRadarDetectors]

Is there a way to tell from your iPhone if you were hit with front or rear laser other than the real-time display?

It will display it on the screen and will verbally tell you if its a front or rear hit in the app. If you are using the included remote LED it will also illuminate different colors during an alert if its from the front or rear.

[indytoatl]

It will display it on the screen and will verbally tell you if its a front or rear hit in the app. If you are using the included remote LED it will also illuminate different colors during an alert if its from the front or rear.

It would be nice to add the direction feature to the history. I would like to know which direction the alert came from if I only have time to press the parking button and slow down. It's an intense moment even for a seasoned driver ;-)

[Vortex]

Thanks for posting this. It seems complicated at first, but once you do it a few times, it's not so big a deal.

I can get the ALP to save the setup.alp file to my USB drive and it gives me the successful blue blink, but when I upload the file to the website, it tells me "Uploaded file is not valid" which is bizarre.

Looking at the logs you posted, I wish there was a timestamp based log you could create saying at this date and time you were shot with this gun, at that date and time you were shot with that gun, etc.

The way things currently are with a simple counter, once you start using it for a while, unless you remember where you left off, you may not know which gun's counter got ticked up by 1.

I'm definitely looking forward to the Hifi module to give me the verbal announcements like my 905's, and I hope there's a short alert audio package available which will announce the gun quickly.

[BestRadarDetectors]

Thanks for posting this. It seems complicated at first, but once you do it a few times, it's not so big a deal.

I can get the ALP to save the setup.alp file to my USB drive and it gives me the successful blue blink, but when I upload the file to the website, it tells me "Uploaded file is not valid" which is bizarre.

Looking at the logs you posted, I wish there was a timestamp based log you could create saying at this date and time you were shot with this gun, at that date and time you were shot with that gun, etc.

The way things currently are with a simple counter, once you start using it for a while, unless you remember where you left off, you may not know which gun's counter got ticked up by 1.

I'm definitely looking forward to the Hifi module to give me the verbal announcements like my 905's, and I hope there's a short alert audio package available which will announce the gun quickly.

With using the latest versions of ALP Connect if you are hit the announcement will continue to play the alert message in full even if the threat stops. I expect the HiFi module will do the same.
I have also requested in the future that they add a Last 5 Alerts to the ALP Stats so you will see the last 5 active alerts in order and you will still having the running totals as well.

[Vortex]

With using the latest versions of ALP Connect if you are hit the announcement will continue to play the alert message in full even if the threat stops. I expect the HiFi module will do the same.
I have also requested in the future that they add a Last 5 Alerts to the ALP Stats so you will see the last 5 active alerts in order and you will still having the running totals as well.

Oh nice, fantastic on both accounts.