Close
Results 1 to 10 of 93

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Administrator Mirage's Avatar
    Join Date
    Oct 2013
    Posts
    1,146
    Thanks Given
    539
    Thanked 1,644 Times in 520 Posts

    AL Priority - What Have I Been Hit By?

    Another cool feature for those of you that are not familiar is the Settings & Use Statistics generation.

    To Get the Stats:

    1. Connect USB flash drive to the USB port in AL Control Box, or in USB extension cable,
    2. Enter Yellow Menu by long press of MENU button,
    3. Press NEXT 7 times then press ENTER (you will enter Service Code sub-menu and LED will turn white),
    4. Now Press NEXT 2 times then press ENTER and wait for sound sequence to finish,
    5. Again Press NEXT 2 times then press ENTER and wait for sound sequence to finish,
    6. Once more press NEXT 2 times then press ENTER.
    7. AL system will store your present settings and use statistics to USB flash drive by creating a file named Setup.alp. If file storing was successful the system will alert you with a short blue LED light. The AL system will exit yellow menu after a few seconds of being inactive.
    8. Connect this USB flash drive to your computer.
    9. Click Browse and find the Setup.alp file on your USB memory drive and press Upload.



    You will get results like this:

    Device information
    Serial number XXXXXXX
    Firmware version 4.2.2
    Region North America
    Power Cycles 37
    Control Set FW version 2.4
    Control Set HW version 1
    Settings
    Audio Volume 5
    Parking detection range 3
    Silent Power-up Disabled
    Dark Mode Enabled
    Parking enabled sensors Rear1, Rear2
    GPS Antenna Enabled
    PDC Speed Limit n/a
    Working mode Parking and Laser Interference Defense
    Pro mode Enabled
    LID Speed Limit n/a
    Radar Antenna Model Not Connected
    Radar Settings
    LID Time Unlimited – Test purposes

    Specific LID settings
    Vitronic Poliscan
    Speed scanner
    Enabled
    Unicam Camera
    Section speed control
    All sensors ON
    NJL SCS
    Speed-laser
    Enabled
    Riegl
    Speed-laser
    Enabled
    Trafic Observer
    Speed scanner
    Enabled
    Stalker
    Speed-laser
    Maximum Power

    Alerts by Source Speed-laser
    Marksman and UltraLyte 1
    Atlanta SpeedLaser Stealth 0
    Kustom ProLaser 1 0
    Kustom ProLaser & ProLite 4
    Redspeed SpeedGuard 0
    Riegl 0
    Stalker 5
    LTI Truspeed 1
    Unipar - SL700 0
    NJL SCS 101 & 102 0
    Jenoptik – Laveg 0
    Leivtec XV 2 0
    Laser Ally 41

    Error Sensitive Lasers
    Jenoptik LaserPatrol 0
    Jenoptik TraffiPatrol XR 0
    ProLaser 2 & Atlanta SpeedLaser 0

    Speed Section Control
    Camea - IR Camera 0

    Speed Scanner
    Traffic Observer 0
    Vitronic Poliscan 12

    Radar
    K-band 0
    Ka-band 0
    X-band 0
    POP 0


    These are my stats from the testing this weekend. Now the interesting part is the Vitronic Poliscan hits. Hmm.. Not possible in my state so will need to look into this further. As you can see we tested the snot out of the DALA.

  2. The Following 15 Users Say Thank You to Mirage For This Useful Post:

    alatilla (05-18-2016), curmudgeon (11-16-2013), dinkydi (11-16-2013), melbVt (04-14-2014), modsl55amg (03-22-2015), RadarNinja (08-21-2015), Radarrob (11-16-2013), RedRocket (11-20-2013), RigToFly01 (11-16-2013), Salty (12-30-2013), TeamQuack (04-04-2015), thesilverbullet (11-20-2013), Tman (01-26-2014), winterbrew (11-16-2013), Yellowcab (11-16-2013)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •