AL Priority - What Have I Been Hit By?

[Mirage]

Another cool feature for those of you that are not familiar is the Settings & Use Statistics generation.

To Get the Stats:

1. Connect USB flash drive to the USB port in AL Control Box, or in USB extension cable,
2. Enter Yellow Menu by long press of MENU button,
3. Press NEXT 7 times then press ENTER (you will enter Service Code sub-menu and LED will turn white),
4. Now Press NEXT 2 times then press ENTER and wait for sound sequence to finish,
5. Again Press NEXT 2 times then press ENTER and wait for sound sequence to finish,
6. Once more press NEXT 2 times then press ENTER.
7. AL system will store your present settings and use statistics to USB flash drive by creating a file named Setup.alp. If file storing was successful the system will alert you with a short blue LED light. The AL system will exit yellow menu after a few seconds of being inactive.
8. Connect this USB flash drive to your computer.
9. Click Browse and find the Setup.alp file on your USB memory drive and press Upload.

You will get results like this:

Device information
Serial number	XXXXXXX
Firmware version	4.2.2
Region	North America
Power Cycles	37
Control Set FW version	2.4
Control Set HW version	1
Settings
Audio Volume	5
Parking detection range	3
Silent Power-up	Disabled
Dark Mode	Enabled
Parking enabled sensors	Rear1, Rear2
GPS Antenna	Enabled
PDC Speed Limit	n/a
Working mode	Parking and Laser Interference Defense
Pro mode	Enabled
LID Speed Limit	n/a
Radar Antenna Model	Not Connected
Radar Settings
LID Time	Unlimited – Test purposes
Specific LID settings
Vitronic Poliscan Speed scanner	Enabled
Unicam Camera Section speed control	All sensors ON
NJL SCS Speed-laser	Enabled
Riegl Speed-laser	Enabled
Trafic Observer Speed scanner	Enabled
Stalker Speed-laser	Maximum Power
Alerts by Source Speed-laser
Marksman and UltraLyte	1
Atlanta SpeedLaser Stealth	0
Kustom ProLaser 1	0
Kustom ProLaser & ProLite	4
Redspeed SpeedGuard	0
Riegl	0
Stalker	5
LTI Truspeed	1
Unipar - SL700	0
NJL SCS 101 & 102	0
Jenoptik – Laveg	0
Leivtec XV 2	0
Laser Ally	41
Error Sensitive Lasers
Jenoptik LaserPatrol	0
Jenoptik TraffiPatrol XR	0
ProLaser 2 & Atlanta SpeedLaser	0
Speed Section Control
Camea - IR Camera	0
Speed Scanner
Traffic Observer	0
Vitronic Poliscan	12
Radar
K-band	0
Ka-band	0
X-band	0
POP	0

These are my stats from the testing this weekend. Now the interesting part is the Vitronic Poliscan hits. Hmm.. Not possible in my state so will need to look into this further. As you can see we tested the snot out of the DALA.

[RigToFly01]

May I say that this thread should be "STICKY"

[Holla]

To get into these "settings" is it outlined anyplace for us to look at and do in a manual or the ALP website

[Mirage]

Go here and you can look at the settings:

http://www.alpriorityupdate.com/

Click Setup. You don't have to have a serial number to look at the settings. The other two selections require a valid serial number.

[BestRadarDetectors]

Statistics might have several bugs as the process is being redone to incorporate the full radar integration. When the integration is complete I will do a full write-up.

[Mirage]

Statistics might have several bugs as the process is being redone to incorporate the full radar integration. When the integration is complete I will do a full write-up.

Ok great. Yeah the Poliscan hits were odd. Everything else looks like it is right on the money other than a few of the counts don't appear to be correct. But it correctly identified all the guns we used on Friday.

[winterbrew]

I got a couple of Camea IR section controls appear on launch firmware, but no more problems on 4.2.2. I think one of the 4.2.2 updates was 'improve Poliscan detection, and reduce falsing'

[BestRadarDetectors]

As you can see we tested the snot out of the DALA.

Your AL Priority is still a virgin... Here are my stats:

Device information
Serial number XXXXXXX
Firmware version 4.2.2
Region North America
Power Cycles 96
Control Set FW version 2.4
Control Set HW version 1
Settings
Audio Volume 3
Parking detection range 3
Silent Power-up Disabled
Dark Mode Disabled
Parking enabled sensors Front1, Front2, Front3, Rear1, Rear2
GPS Antenna Enabled
PDC Speed Limit n/a
Working mode Parking and Laser Interference Defense
Pro mode Disabled
LID Speed Limit n/a
Radar Antenna Model STIR+
Radar Settings X, K, Ka
LID Time Unlimited – Test purposes
Specific LID settings
Vitronic Poliscan
Speed scanner Enabled
Unicam Camera
Section speed control All sensors ON
NJL SCS
Speed-laser Enabled
Riegl
Speed-laser Enabled
Trafic Observer
Speed scanner Enabled
Stalker
Speed-laser Maximum Power
Alerts by Source Speed-laser
Marksman and UltraLyte 50
Atlanta SpeedLaser Stealth 2
Kustom ProLaser 1 2
Kustom ProLaser & ProLite 39
Redspeed SpeedGuard 0
Riegl 0
Stalker 156
LTI Truspeed 76
Unipar - SL700 0
NJL SCS 101 & 102 0
Jenoptik – Laveg 0
Leivtec XV 2 0
Laser Ally 240
Error Sensitive Lasers
Jenoptik LaserPatrol 0
Jenoptik TraffiPatrol XR 0
ProLaser 2 & Atlanta SpeedLaser 8
Speed Section Control
Camea - IR Camera 0
Speed Scanner
Traffic Observer 0
Vitronic Poliscan 9
Radar
K-band 0
Ka-band 0
X-band 0
POP 0

[Mirage]

Your AL Priority is still a virgin...

You might want to remove that serial number oh experienced one... LOL. You have to remember mine was in 1 day! So yes still very much a virgin!

[BestRadarDetectors]

You might want to remove that serial number oh experienced one... LOL. You have to remember mine was in 1 day! So yes still very much a virgin!

LOL... I am sure yours will see some more action but my unit has a big head start. I do notice I also have 9 Poliscan's listed so one of the guns is coded to the wrong name and we will have to get that fixed.