Close
Results 1 to 6 of 6

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #2
    Moderator winterbrew's Avatar
    Join Date
    Nov 2013
    Location
    Western Australia
    Posts
    1,803
    Thanks Given
    1,850
    Thanked 1,697 Times in 929 Posts
    NetRadar DSP is based on the Attowave DSP platform (same as Uniden R3). Due to hardware limitations, it cannot scan below 24.050 GHz on K band.

    The new Uniden R7 removes this limitation.

    The Radenso RC-M / Pro M or Genevo Pro M / One M also scan down to the lower K band range (23.950 GHz), as do may Escort products, along with the later firmware V1's
    Last edited by winterbrew; 01-26-2019 at 08:32 AM.
    2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •