Solid green LED

[BestRadarDetectors]

You call call the office tomorrow with your serial numbers.

Sent from my SM-G935T using Tapatalk

[jccr413]

You call call the office tomorrow with your serial numbers.

Sent from my SM-G935T using Tapatalk

Ok thanks


Sent from my iPhone using Tapatalk

[jccr413]

Here is a brief example



Sent from my iPhone using Tapatalk

[radargeek]

If you're getting F1 sensor errors unplug that sensor and see if you still get the "stuck on green" situation. If you do, unplug another sensor, repeat until you've found the culprit.

Then check the wiring to make sure it isn't pinched somewhere or rubbed through. If the wiring is ok and the problem continues, it's a faulty sensor most likely.

[jccr413]

If you're getting F1 sensor errors unplug that sensor and see if you still get the "stuck on green" situation. If you do, unplug another sensor, repeat until you've found the culprit.

Then check the wiring to make sure it isn't pinched somewhere or rubbed through. If the wiring is ok and the problem continues, it's a faulty sensor most likely.

How can I tell if I'm getting which sensor error? I don't have a speaker. I'm finally getting it to work with 2 sensors. On F1 & F2. It's staying solid green for nearly 2 mins then it goes into solid blue. Even though skip warm up is on.

When turn off and plug in the 3rd sensor (not even trying the 4th because I'm sure it's broken it's getting burning hot) and turn it back it stays solid green.


Sent from my iPhone using Tapatalk

[BestRadarDetectors]

How can I tell if I'm getting which sensor error? I don't have a speaker. I'm finally getting it to work with 2 sensors. On F1 & F2. It's staying solid green for nearly 2 mins then it goes into solid blue. Even though skip warm up is on.

When turn off and plug in the 3rd sensor (not even trying the 4th because I'm sure it's broken it's getting burning hot) and turn it back it stays solid green.


Sent from my iPhone using Tapatalk

Pull a statistics file if you dont have HiFi or BT..... http://www.alpupdate.com/statistics

[Holla]

HI-FI makes life simple and you can hear the guns you are shot with---worth the $$$$$ ++it will tell you what sensor is bad so not allot of troubleshooting

[jccr413]

I know I'm considering getting. I think I figured my problems were 2 bad cables and one bad head. Now I'm wondering if I could use that extra head I have working and plug it into another CPU like the laser interceptor ones which seems to be same RJ plug and are going for the low. Maybe I can install it on my other car,


Sent from my iPhone using Tapatalk

[geiz]

BRD, do you think a failing F1 sensor can cause my solid green? It happened again today twice. First after work it went green on start up for 15 minutes, then went into defense mode. That was after sitting parked and unpowered for 9 hours. Then I stopped at a store, started back up and got green for about 5 minutes, then it went into defense mode.

[BestRadarDetectors]

I know I'm considering getting. I think I figured my problems were 2 bad cables and one bad head. Now I'm wondering if I could use that extra head I have working and plug it into another CPU like the laser interceptor ones which seems to be same RJ plug and are going for the low. Maybe I can install it on my other car,


Sent from my iPhone using Tapatalk

You will fry the head if you plug in into a system that is not an ALP.