I have these random sensor issues during bootup, or something about a self test fail. It happens once in a blue moon.
Live with it or is this a cause for concern?
Danke.
Printable View
I have these random sensor issues during bootup, or something about a self test fail. It happens once in a blue moon.
Live with it or is this a cause for concern?
Danke.
Depends what the error actually is. If its an Error 2 then its just stating that there is interference and it does not necessarily mean something failed but if it tells you that the automatic sensor check failed and points you to a certain sensor than you should inspect that sensor and wiring for damage.Quote:
Originally Posted by angrypenguin
Thanks. The first error was sensor 2 failed. That only happened once.Quote:
Originally Posted by BestRadarDetectors
Turned it off, then back on. Attempt 2 and 3 was error 2.
Attempt 4 and onwards = fine.
Using a laser tester devices there weren't an issue once the system went to 'blue mode'. Thoughts? Thanks!
Lots of things can cause an Error 2. Sun or even parking close to an obstacle.
Sent from my SM-G935T using Tapatalk
Thanks - neither case was relevant in my scenario though. Vehicle was sitting in the driveway (shade), and there wasn't anything close to it (the closest wall was maybe 6 feet away). Oh well, I'll ignore it for now.Quote:
Originally Posted by BestRadarDetectors
Is it common to get a sensor failure or is a one off usually not a big deal? Thx!
just a guess could it be the cpu by any chance, is there a way to hard reset the cpu, or have u found a faulty sensor, one of our oz guys has got the same error 2 started yesterday when he got hit with Polis, ive also had strange things after being hit by Polis,may be the cpu gets its self mixed up, hes,s also checking things out
Mine started to play up Friday as well.
Alp connect app dropped out, restarted it then 30 seconds later I got a Poliscan false.
After that it was fine until Saturday when it's just constantly freaking out about VPS and Traffic Obs.
I assume one of my rear heads is failing but damn it's a PITA to get to the wiring to do an isolation test to confirm which one.
Attachment 5655
Attachment 5656
Attachment 5657
is the self test on start up suppose to check all things for a 100% to be operational, there,s gotta be a better way for fault finding instead of having to Digg all the wiring out which can be very expensive costs, BA have u tested with ur gun to see if all 4 heads respond when u have the blue car in defense mode, i get that traffic observer as well but dont know what triggers it
Have you tried it on 5.3.3 firmware which was released yesterday ?
Looks like a bit of a bug fix release, but definately sounds like a failing sensor
Doubtful. Hit the stats button after you get an error and it will pinpoint which sensor is causing the error.Quote:
Originally Posted by dinkydi
ah ah that's good to know, would that also show a faulty connection say in the wiring as well as a faulty sensor
It will only tell you which port is showing a fault and you will have to check the wiring and sensor connected to that port.Quote:
Originally Posted by dinkydi
Sent from my SM-G935T using Tapatalk
ok the good old ohm's meter ;)
Hah really?Quote:
Originally Posted by BestRadarDetectors
That's actually helpful as I have my wiring noted down. :)
So hit system stats in the app?
lets know how u go
App didn't show it. Hah
Head finally died 100%
Was able to check for parking alerts on each head until I located the offending sensor.
Looks to be one of my original heads, wonder if I should warranty it or just smash it for science? :)
Sent from my iPhone using Tapatalk
u sure, i had a head that parking sensor didnt work, when tested with tester not a gun it worked fine, when blue car was active
Before you smash it better check and make sure parking was enabled in your settings on all sensors.Quote:
Originally Posted by beingaware
That it was. :)Quote:
Originally Posted by BestRadarDetectors
I use them as backup to my cars parking system.
Unplugged the suspect head and my error 2s went away.
Our warranty laws in Australia are such that Sellers in Australia have to replace defective parts even 5 years later.
Apple and HP got nailed for breaching this 2 years ago and have since been very proactive on repairs.
Geez I didn't, know that
Yep, most shops will honour it too.Quote:
Originally Posted by dinkydi
Otherwise remind them of the ACCC laws re faulty products.
Eitherway, caught up with @dragons yesterday and we discovered it's one of my new heads.
So warranty time. :)
Cheers for your help Dragons.
Somebody remind Tim & Josh then, I've had 4 heads fail 1 cpu and the CPU was under warranty and they won't cover heads after 2 years, Plain RUDENESS of DCG!Quote:
Originally Posted by beingaware
If 1 ALP head dies each season it becomes an expensive game
Do they not offer a reduced price replacement after 2 year warranty expires?Quote:
Originally Posted by melbVt
Falls under this law in Australia: https://www.accc.gov.au/business/tre...ts-obligationsQuote:
Originally Posted by BestRadarDetectors
Which ties to this sub law: https://www.accc.gov.au/business/tre...gainst-defects
By our law, he is entitled to the unit being replaced even 3 years after warranty expires at no charge as long as the fault wasn't caused by improper use or damage.
I haven't had any issues with Tim providing warranty replacement but I do have a good relationship with him.
Where are your heads installed?Quote:
Originally Posted by melbVt
if thats the Law here in OZ ,Tim should be aware of this irrespective of whether or not, he should not differentiate , but i've always found Tim very helpful, but he has his moments like us all :D
yep interesting , very high failure rate for all the heads and cpu,Quote:
Originally Posted by beingaware
I got my first 'Error 2' notification on Monday. The system repeats "Error 2 - Check cables or defective sensor" over and over again until I want to shoot myself (let it repeat itself about 20 times just to see if it would finally shut up). Doesn't seem like there is any way to mute the error other that turning the volume off to the phone all together or powering off the ALP altogether. I power cycled twice to no avail, but on the third power cycle the ALP booted up normally. Didn't happen at all yesterday or on my drive to work today, but happened again on my drive home today. Again, had to power cycle 3-4 times before I could get the system to boot up normally.
Is this the behavior others are experiencing as well? Why would the system repeat the error continually instead of just saying it once like it does with other errors?
Error 2 is an interference error and it indicates that a sensor is currently compromised and will alert until the condition is cleared. Bright direct Sun, Being trailed by cars with Laser Guidance Systems, etc. Can all trigger it. We're you in the same spot with same conditions when it triggered?Quote:
Originally Posted by sfpd
Sent from my SM-G935T using Tapatalk
Front Under each headlight and one center,Quote:
Originally Posted by beingaware
Rear Two either side number plate
sorry late reply