Just resolved an issue with info provided from Alex CDN distributor..if you load 5.2.6 and do not opt to enable any parking option in your configuratin file, the control will alert a sensor error at boot...at least this happened for me on 2 systems
Printable View
Just resolved an issue with info provided from Alex CDN distributor..if you load 5.2.6 and do not opt to enable any parking option in your configuratin file, the control will alert a sensor error at boot...at least this happened for me on 2 systems
With the movement into online config files for users of ALP Connect the ALP Update site has been undergoing changes and if a user has an ALP Config file that is NOT Current it will throw a checksum error and reset defaults and force an updated config file to be loaded. If you update the config file the message will go away. If you instead reload your old file and not a new one the error will come back.Quote:
Originally Posted by Nanook
Sent from my SM-G935T using Tapatalk
ahaa been getting that on occasion time for a correction
Okay I have a mea culpa..just as Tom predicted I ended up having a bum sensor..rear.Replaced it today with a new (no warranty..bummer) and it looks like my issues have been resolved..when in doubt best heed the experienced word [emoji106]
Sent from my iPad using Tapatalk
Well if appears the issue is still active..one connector..that same wire of which I replaced the sensor is still giving a fault..except when I plug it to a front socket (it's a rear sensor) don't know what the hell is going on
Sent from my iPad using Tapatalk
Interesting to know what may be the cause to the bum sensor?Quote:
Originally Posted by Nanook
> Have you washed your car with high pressure hose?
> Have you used a Laser interceptor remote or other kind remote to test your unit?
> Have you shot a laser gun too close to sensor?
Do you have an extension cable?Quote:
Originally Posted by Nanook
Sent from my SM-G935T using Tapatalk
Yes it's connected to an extension cable..I put a new sensor on this cable and this cable appears (have not tested) to work properly when plugged into a front socket
Firstly this cct has a new sensor installed and still appears to fault..Quote:
Originally Posted by melbVt
regardless..yes to pressure washer...yes to laser tester and no to laser gun..
I'm going to try this..
plug the rear two into the front two (omit center front sensor for now)
plug the front two outer into the rear ports
I'll really be stymied if this set up works okay :)