Does ALP fire all 5 heads at once or slip 3/2?

To answer this question.

My 5 head front array vs UL UX 125pps and a IR Cam.
(Poliscan defence configuration).
http://www.youtube.com/watch?v=SG7whdhI3Og


Confirming that you can indeed run all 5 up front :).

After talking to the AL engineer last week, we discovered the same thing. What he said was that if front and rear receivers are hit at the same time the front takes precedence. But as you've shown they all fire.

Sent from my SCH-I535 using Tapatalk

good vid seems to be all in sync

Quote:

---

Originally Posted by mirage

After talking to the AL engineer last week, we discovered the same thing. What he said was that if front and rear receivers are hit at the same time the front takes precedence. But as you've shown they all fire.

Sent from my SCH-I535 using Tapatalk

---

Correct. If front and rear are triggered at the same time all will fire back in sync and use the FRONT alert notification.

You can't do a proper test with a regular camera, it's too slow. Also - you did a test with 125 Hz UltraLyte, you can't be sure that ALP will behave exactly the same for all other guns.

Quote:

---

Originally Posted by KrpA

You can't do a proper test with a regular camera, it's too slow. Also - you did a test with 125 Hz UltraLyte, you can't be sure that ALP will behave exactly the same for all other guns.

---

No testing was even needed... Its how it was designed from engineering.

Quote:

---

Originally Posted by KrpA

You can't do a proper test with a regular camera, it's too slow. Also - you did a test with 125 Hz UltraLyte, you can't be sure that ALP will behave exactly the same for all other guns.

---

Good point please put up your test results oh wait you haven't done any . Thanks BA for taking the time to do and post every bit of testing helps.

+1

I'm just saying that if you have serious technical question like this it's better to ask BRD to check with ALP engineering team, than to draw a conclusion form an obviously incomplete method.

Please don't be so rude to me, I'm shy :-)

Quote:

---

Originally Posted by KrpA

I'm just saying that if you have serious technical question like this it's better to ask BRD to check with ALP engineering team, than to draw a conclusion form an obviously incomplete method.

Please don't be so rude to me, I'm shy :-)

---

Thanks for more valuable input.