5.2.6 bug..throws code if no parking option configured

Quote:

---

Originally Posted by Nanook

I'm going to try this..

plug the rear two into the front two (omit center front sensor for now)
plug the front two outer into the rear ports

I'll really be stymied if this set up works okay :)

---

Good luck !:courage:

May have a revelation..First I removed the BT ver:1 module that I never really used...then I did a complete reconfigure removing all sensors and re-inserting each in their home location one at a time doing a re-learn reboot each time..and each time got a clean boot..and finally with the BT gone all seems okay...did possibly the upgrade to the last latest f/w 5.2.6 possibly cause a conflict with the BT module ver:1 ????
After several power off and reboots without the BT module in the works everything appears okay...fingers crossed !!

Question..what is the alert if the power level is deficient or inadequate...does the control box alert to this ?...

Quote:

---

Originally Posted by Nanook

Question..what is the alert if the power level is deficient or inadequate...does the control box alert to this ?...

---

Yes, I had a battery with a failed cell, and the the alert (through hi-fi) was something like 'warning - low battery voltage'

Dayum...I think this whole episode may be battery/power level related...do you know what the alert is from the control unit ?

Quote:

---

Originally Posted by Nanook

Dayum...I think this whole episode may be battery/power level related...do you know what the alert is from the control unit ?

---

Just looked at the manual ;

Quote:

---

ERRORS:*
LED constant red + 1 beep:
Error 1; low voltage, check vehicle power supply

---

Hmmm..doesn't sound like it but I thank-you for this..it's so odd because it only does it some of the time..gotta do more trouble shooting

yep does the same with me the low battery power , must have a sensitive voltage warning threshold

If you run with control box what type of code alert do you get ? TIA

Quote:

---

Originally Posted by Nanook

Question..what is the alert if the power level is deficient or inadequate...does the control box alert to this ?...

---

winterbrew answered your question in Post #16...

Quote:

---

Originally Posted by Nanook

If you run with control box what type of code alert do you get ? TIA

---

...so I'm confused why you're asking again.

Do you have 2 different AL-P sys b/c of 2 vehicles ?
1. Basic Control Set (non HiFi) - ERRORs:*
LED constant red + 1 beep:
Error 1; low voltage, check vehicle power supply

2. HiFi Control Set:
* If you are using a HiFi Control Set w/ an exterior speaker, instead of error and warning tones you will hear descriptive information for each specific error.