AL Priority Firmware Update History (Running History)

5s phone, another strange thing is the car will turn blue to defensive when u reach the set speed but with 0 kmh on the phone reading when not using the privacy Dodge

It all went t!!!ts up, with ios8

Quote:

---

Originally Posted by dinkydi

5s phone, another strange thing is the car will turn blue to defensive when u reach the set speed but with 0 kmh reading when not using the privacy Dodge

---

Because the settings are based on the GPS antenna connected to the CPU but the displayed speed on the app is coming from the phones GPS. So all functions will still work properly but the displayed speed on the phone might not be working if the app does not have access to the phones GPS. AL is working on getting the speed from the attached GPS antenna (Soon) so that you would no longer rely on the phones GPS if you have the direct GPS connected to the CPU.

Quote:

---

Originally Posted by BestRadarDetectors

But the GPS Function was still working? (Muting under set speeds, etc,) Just the speed was not displayed on the iPhone? You also need to go to the app settings and give permission for the app to use the GPS with the latest IOS versions.

---

Can't see this option in settings, only change mph to kmh or has it to be set in controller optionn

Quote:

---

Originally Posted by dinkydi

Can't see this option in settings, only change mph to kmh or has it to be set in controller option

---

The GPS permission (Location Settings) are not part of the settings of ALP Connect. Its the app settings for the phone itself. My iPhone is dead at the moment and its 1AM here, so I will charge it over night and get some screen shots tomorrow if someone does not beat me to it.

See this thread: http://radarandlaserforum.com/showth...ng-on-iPhone-5

Issue with IOS 8.0 is that its not saving the settings.

I'm using iPhone 6 Plus with issues.
The plus apparently is slightly different to the 6
But it's probably all of them in combination with ios8 anyways

Quote:

---

Originally Posted by BestRadarDetectors

Correct but only when turned off. When back on it should act normally with the timed flashes and quicker sounds as you get closer.

---

Why was the flashing red changed to a solid red? With the old firmware, I could at least tell how far I was from an obstacle by looking at the light (even with the sound turned off). With the solid red light, I cannot do that.

Quote:

---

Originally Posted by awj223

Why was the flashing red changed to a solid red? With the old firmware, I could at least tell how far I was from an obstacle by looking at the light (even with the sound turned off). With the solid red light, I cannot do that.

---

Not sure and I dont really know when it changed. It most likely had to do with changes to make all the new stuff compatible with each other.

Are these updates cumulitive or does the last one issues update everything to present?

Quote:

---

Originally Posted by specifics

Are these updates cumulitive or does the last one issues update everything to present?

---

Last one is all you need.