Printable View
Hi!
I am using ALP together with the new Radenso / Genevo HD+ antenna...
is anyone aware of the new settings and what they exactly do?
- K-Narrow (What narrow bands are that exactly on K?)
- Ka-POP (and how does that interfere with the Ka band N1-N4 settings?)
and
- TSR OFF, LOW, HIGH whats that?
Ok - the question was too quick as google is my friend :)
So I will try to answer myself, please confirm or correct me:
K-Narrow is filtering the K band to detect 24.125 +/- 70mhz only.
So less false alarms should be triggered BUT for usage it needs K band active and so that band is cycled - and detection time is decreasing a bit. How much - that's to find out.
Ka-POP: POP is a "burst mode" used by some radar guns (produced by MPH) to send very short signals. In this mode, the detector has to scan 33.725-33.875 GHz very, very, very often so there is less time to scan N1-N4 (34,0GHz, 34,3GHz, 34.7GHz, 35,5GHz (± 120MHz)). In other words: keep that off if you are not sure that those guns are used in your area as detection time will suffer.
TSR is "traffic signal recjection" what seems to be kinda traffic flow monitoring using K/X band sensors which are being turned off/on about every minute. This feature tries to detect that and filter out those alerts - but again makes only sense when using those bands.
Correct?
Sounds pretty good.
TSR low/high also offers varying levels of filtering against blind spot falses. Low offers better performance (shorter delay) while high offers better filtering (longer delay).
How do you like that combination? I take it you live abroad? We're still awaiting the remote Radenso here in the States. :)
Our traffic flow / traffic counting systems here work differently: using K-band only and permanently turned on to count vehicles, measure their size ("car or truck?") and speed (no tickets *g*). In a second step the data is transmitted to a central server and there the traffic flow is calculated from all measure points.Quote:
Originally Posted by Vortex
Additionally, we have no MPH / POP products here but laser and KA - Systems only.
So I found out I cannot tell anything about the new features, sorry :(
These settings:Quote:
Originally Posted by Licht77
K-Narrow
TSR OFF
TSR LOW
TSR HIGH
Are ONLY for the new Radenso HD+ and will not do anything on the older Genevo models that do not support the enhanced 975 protocol.
I just recently updated my ALP but I don't show settings for Redenso detector? is this for another country or in US to? I have Redenso SEQuote:
Originally Posted by BestRadarDetectors
You do not have a Radenso HD+ which is a remote mounted antenna.
Sent from my SM-G928T using Tapatalk