Please check my stats file. this was a new install & i want to make sure it all looks

[rxbg]

ok. it seems to have gone according to plan. i have the Hi Fi and the BT modules. iphone app works ok it seems. just want to make sure the control module FW is up to date and that i selected the right radar antenna. i bought the new antenna that comes with the kit- so i selected the NET radar in the set up. is that the right one? also-


in the app:

what does configure ALP online mean?

what does suppressed database mean?

also- sounds crazy but i do not understand what the GPS is supposed to do in my unit? does it allow the system to ignore the locations of false k's while i am driving?


Serial number 4953811
CPU Hardware version 2
Firmware version 5.2.7
Region North America
Power Cycles 7
Control Set FW version 5.3
Control Set HW version 2
Activated locks not active
Hardware version 2
Connected sensors
Connected sensors (memorized) Front1, Front2, Rear1, Rear2
Connected sensors (actual) Front1, Front2, Rear1, Rear2
Connected TX sensors (stored)
Connected TX sensors (actual)
Alerts by Source Speed-laser
Marksman and UltraLyte 0
Atlanta SpeedLaser Stealth 0
Kustom ProLaser 1 0
Kustom ProLaser & ProLite 0
Redspeed SpeedGuard 0
Riegl 0
Stalker 0
LTI Truspeed 0
Unipar - SL700 0
NJL SCS 101 & 102 0
Jenoptik – Laveg 0
Leivtec XV 2 0
Leivtec XV 3 0
Laser Ally 0
Cam S1 0
ARH TrafficSpot 0
Error Sensitive Lasers
Jenoptik LaserPatrol 0
Jenoptik TraffiPatrol XR 0
ProLaser 2 & Atlanta SpeedLaser 0
Stalker XLRr 0
Speed Section Control
Camea - IR Camera 0
Speed Scanner
Traffic Observer 0
Vitronic Poliscan 0
Radar
K-band 0
Ka-band 0
X-band 0
POP 0
MultaRadar CD 0

[rxbg]

and these is the config information


Profile A
Settings
Audio Volume 5
Parking detection range 3
Silent Power-up Disabled
Dark Mode Normal
Parking enabled sensors
GPS Antenna Enabled
PDC Speed Limit 10 km/h
Working mode Parking and Laser Interference Defense
Pro mode Disabled
LID Speed Limit NONE
Below set LID Speed Limit PDC & DLI
Radar Antenna Model NET‐Radar
Radar Settings
LID Time Unlimited – Test purposes
After LID timeout DLI & Warm up
Audio volume of Laser Alerts 5
Audio volume of Radar Alerts 5
Menu button short press function None
Specific LID settings
Vitronic Poliscan
Speed scanner Enabled
Unicam Camera
Section speed control Front sensors ON
NJL SCS
Speed-laser Enabled
Riegl
Speed-laser Enabled
Trafic Observer
Speed scanner Enabled
Stalker
Speed-laser Maximum Power
ARH TrafficSpot
Speed scanner Disabled
Profile B
Settings
Audio Volume 3
Parking detection range 3
Silent Power-up Disabled
Dark Mode Normal
Parking enabled sensors Front1, Front2, Front3, Rear1, Rear2
GPS Antenna None
PDC Speed Limit NONE
Working mode Parking Detection only
Pro mode Disabled
LID Speed Limit NONE
Below set LID Speed Limit PDC & DLI
Radar Antenna Model Not Connected
Radar Settings
LID Time 3 seconds
After LID timeout Warm up
Audio volume of Laser Alerts 6
Audio volume of Radar Alerts 6
Menu button short press function None
Specific LID settings
Vitronic Poliscan
Speed scanner Enabled
Unicam Camera
Section speed control Front sensors ON
NJL SCS
Speed-laser Enabled
Riegl
Speed-laser Enabled
Trafic Observer
Speed scanner Enabled
Stalker
Speed-laser Maximum Power
ARH TrafficSpot
Speed scanner Disabled
Profile C
Settings
Audio Volume 3
Parking detection range 3
Silent Power-up Disabled
Dark Mode Normal
Parking enabled sensors Front1, Front2, Front3, Rear1, Rear2
GPS Antenna None
PDC Speed Limit NONE
Working mode Parking Detection only
Pro mode Disabled
LID Speed Limit NONE
Below set LID Speed Limit PDC & DLI
Radar Antenna Model Not Connected
Radar Settings
LID Time 3 seconds
After LID timeout Warm up
Audio volume of Laser Alerts 6
Audio volume of Radar Alerts 6
Menu button short press function None
Specific LID settings
Vitronic Poliscan
Speed scanner Enabled
Unicam Camera
Section speed control Front sensors ON
NJL SCS
Speed-laser Enabled
Riegl
Speed-laser Enabled
Trafic Observer
Speed scanner Enabled
Stalker
Speed-laser Maximum Power
ARH TrafficSpot
Speed scanner Disabled
Print