Hi I'm MelbVt from Melbourne Australia, I use the Al Priority12 and STiR Plus Au/Nz!

[melbVt]

Hi I'm MelbVT from Melbourne Australia, currently I'am the proud owner of the latest Al Priority generation 12 triple sensor 1 rear 2 front, I also use the beltronics STiR Plus Au/Nz model, I enjoy radar laser as a hobby and never use it to hoon and find it purely reminds me to behave, I'm looking into getting a uniden crash cam to make videos of my encounters I had a great 1 on Dandedong Rd today, The speed camera was being worked on and the Al Priority generation 12 triple went off so I done the silly thing and done a happy lap well 1st lap detected I found when light went green it started alerting that there was camera in action, 2nd lap same again as soon as light went green it went off so lap 3 The work man were all scratching there heads looking quite dumb at there Laptop,
I often use the beltronics in tech mode

[Mirage]

Welcome to the forum sounds like you have some nice hardware.

[dinkydi]

welcome from the the Sunny coast another ozzie lots of us guy's, check out our canada/ au forum

[RedRocket]

Hello melbVt,& Welcome to the Forum from the Northeast USA.
Have a question regarding your AL-P Control Pad LED colour.
When AL-P is in the "Active" defense mode during a Poliscan encounter like you had -
What is the colour displayed ?
When in "Standby" mode (eg: non-defense mode),what is the colour of the LED (flashing) then ?

p.s.- You need to seriously talk to your fellow,mates...IMO, you need much better protection against the VPS than you currently have for both Front & Rear !

[busta]

Welcome aboard

[Tman]

Welcome aboard , from Canada Qc ...seems the Alp is gainig popularity quickly.

[shanetrainST]

Hi Mate, Welcome to the forum


Al Priority generation 12 triple sensor 1 rear 2 front, I also use the beltronics STiR Plus Au/Nz model

Nice setup you got there :)

Looking forward to your input

[winterbrew]

Welcome from Perth mate :)

Do you know what type of lidar camera it was. We know that Vitronic Poliscan is approved in VIC, but didn't seem to be deployed yet.

If you follow this link, you can download your stats and see what you've been hit with ;

http://www.alpupdate.com/Statistics

See if you have any entries under Vitronic Poliscan :)

[curmudgeon]

Welcome from where its been freezing rain :disgust: We have a great group of "mates" here who can be of help to you

[Breaker61]

Welcome aboard.

[Yellowcab]

Welcome to,the forum. I look forward to your participation.

[RigToFly01]

Welcome to the forum from NYC!

[melbVt]

Mate Hows it going thank-you for your reply,
Recently I traveled Sydney to Melbourne,
There is a speed check sign (lidar)
Well I can boost and say i set it to jam the whole way as when i see a non fixed i don't JTG I switch it off! Well the car next to me didn't display a speed though the cars in-front did, The AL-PRIORITY triple is enough note shot from front! two jammers front 1 rear sitting nicely on my number plates!
Just rember to set settings in Australia to optimal for stalker to avoid error codes when encountering a stalker lidar

[max]

Welcome from Toronto...

[busta]

Welcome aboard

[TOMMYJR9]

Hello guys & thanks for the access .


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1) 2

[dinkydi]

welcome tommy from the sunny east coast

[RedRocket]

Hello guys & thanks for the access .


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1) 2
Hi TOMMYJR9 & Welcome to the Forum.
Guess I missed your "Intro" post,so I'm catching up w/ you in "melbVt's" thread here...& apologies to him as I'm not trying to hi-jack his Thread here.

[Tman]

Welcome on the forum Mb , hope your weather is calmer on your side
of the ball , here is snow/sleet/freezing rain .....i wont get a speeding ticket
driving my snowblower ...:D

[deano]

welcome from perth

the poliscan is a bitch mate... once the operators find out how the poliscan is supposed to be set up your going to need more heads