Close
Results 1 to 4 of 4
  1. #1
    Member REVNURAZR's Avatar
    Join Date
    Mar 2015
    Location
    Perth, Western Australia
    Posts
    39
    Thanks Given
    7
    Thanked 54 Times in 21 Posts

    V1 Custom Sweep for Australian Radar Bands

    Just having a read of this thread;

    http://radarandlaserforum.com/showth...ming-(Android)

    Has anyone put together a AU/NZ custom sweep on their V1.

    Looking at purchasing the Bluetooth module and programming the V1 to do so, would be very handy to remove all the false alerts that I am constantly getting around shopping centers etc.

    Any advice appreciated or where I can find a detailed list of the KA/K band frequencies used here, I am happy to put together a thread to do so.

    Cheers,

    Brett

  2. The Following User Says Thank You to REVNURAZR For This Useful Post:

    melbVt (02-10-2017)

  3. #2
    Member REVNURAZR's Avatar
    Join Date
    Mar 2015
    Location
    Perth, Western Australia
    Posts
    39
    Thanks Given
    7
    Thanked 54 Times in 21 Posts
    AH, found this;

    http://radarandlaserforum.com/showth...r-Inforomation

    Will have a read up and see if I can get the V1 sorted and less false alarms

  4. #3
    Moderator winterbrew's Avatar
    Join Date
    Nov 2013
    Location
    Western Australia
    Posts
    1,803
    Thanks Given
    1,850
    Thanked 1,697 Times in 929 Posts
    Custom sweeps are only for Ka band, and WA no longer seems to run any Ka band (Multanova 6-F retired, Decatur Genesis Select II withdrawn from service). One promo video of one of the early Concept TE cars appeared to show it running a Stalker unit, but they are not approved in the Govt Gazette

    You can't seg / custom sweep k band on the V1, so not too much use, but I'll post my Ka sweeps up anyway.

    With Yav1 however, you can use 'mute outside the box' for k band.

    To get any relief on k band, you need a Redline Intl / Pro-A or Intl Sti-R+ where you can seg k band. Knocking out k1 and k3 segs, takes out both the BSM falses from the VF Commodore, whilst leaving k2 on, covers the Kustom Signals gear such as the Raptor RP-1, Falcon HR, and the Eagles
    Last edited by winterbrew; 02-06-2017 at 07:48 PM.
    2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |

  5. #4
    Moderator winterbrew's Avatar
    Join Date
    Nov 2013
    Location
    Western Australia
    Posts
    1,803
    Thanks Given
    1,850
    Thanked 1,697 Times in 929 Posts
    Here's mine for Ka band (WA only)

    34593 - 34770 (Stalker 34.7 Part 1, just in case)
    34774 - 34833 (Stalker 34.7 Part 2, just in case)
    35394 - 35615 (35.5, technically outside of ACMA allowed frequencies)
    34996 - 35202 (35.1 Decatur Genesis Select II, withdrawn from service)
    34194 - 34401 (34.3 Multanova 6-F, retired from service)

    Thinking about adding a precautionary 34.9, just in case they decide to start using Ka band antennas on the Raptor RP-1's
    Last edited by winterbrew; 02-06-2017 at 07:57 PM.
    2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |

  6. The Following 2 Users Say Thank You to winterbrew For This Useful Post:

    melbVt (02-10-2017), REVNURAZR (02-13-2017)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •