Close
Results 1 to 1 of 1
  1. #1
    Senior Member radargeek's Avatar
    Join Date
    Jan 2014
    Location
    York, SC
    Posts
    525
    Thanks Given
    116
    Thanked 571 Times in 270 Posts

    Handy tip if you use multiple setup files/USB drives

    Like most of us more advanced ALP users, you probably keep a few USB drives with different setups on them: one LID one with a timeout, one with unlimited for testing, one for parking only, etc.

    Here's a handy tip: Set the LED mode differently for each setup. For example, if you normally run the external LED (or control set LED) dim, dark, or steady (not flashing), set the LED to bright and flashing for your Unlimited setup file.

    This way if you switch to Unlimited for testing, you'll know, and you'll be reminded by the bright flashing LED that you're in unlimited and to switch back when you're finished testing.

    If you normally run your LED dark, and have a parking-only setup for "emergencies", set the LED to on or flashing for this as well, so that you'll have a visible reminder that you're unprotected.
    If I passed you on the right, YOU are in the wrong lane!

    2016 Encounters/Saves (to date): 33.8: 1/1 (last 4/13) | 34.7: 1/1 (last 3/11) | 35.5: 19/11 (last 8/28) | K: 1/1 (last 6/26)
    2015 Encounters/Saves: 33.8: 1/0 | 34.7: 13/4 | 35.5: 19/10 | K: 4/1 | LIDAR (sighted/hit with/save): 4/1/1

    ACTIVE CMs: Redline X, K, Ka 2,4,5,8 (highway/long trip RD) | New! V1C 3.8945 K, Ka CS, TMF2 w/YaV1 (in-town RD) | ALP Quad | BlackVue DR650GW-2CH

  2. The Following 6 Users Say Thank You to radargeek For This Useful Post:

    curmudgeon (11-09-2015), LI2624 (11-07-2015), modsl55amg (11-06-2015), PAPACUCU (11-06-2015), Redmoto (11-10-2015), Vortex (11-06-2015)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •