When using 2 RX and 1 TX & Splitter for the RX's on the rear do I choose R1 & R2 in the sensor config?
When using 2 RX and 1 TX & Splitter for the RX's on the rear do I choose R1 & R2 in the sensor config?
Yes choose both sensors. Just make sure the TX is plugged into R2
I see.
While I waited for a reply I did a config choosing only the R1 as a rear parking sensor and it functioned or alerted to objects in front of it on both RX's.
If I do not choose R2 as a rear parking sensor will the TX on that port be disabled?
Thanks
I see.
While I waited for a reply I did a config choosing only the R1 as a rear parking sensor and it functioned or alerted to objects in front of it on both RX's.
If I do not choose R2 as a rear parking sensor will the TX on that port be disabled?
Actually----- Does parking detection have to be enabled on the both TX ports for the TX to defend?
Thanks
Need Help Choosing a Radar Detector for your needs? Visit our website: http://www.bestradardetectors.net, Send us a PM or call us at 1-888-229-7594
Before looking at an Escort Radar Detector you should really check out Uniden Detectors.. Uniden R1 & R3 are the best performing radar detectors for the money.
gapi (12-03-2017)
Connect With Us